↓ Advertise on Defender2 ↓

Home > Td5 > Refillin R380 gearbox oil
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5843

United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Refillin R380 gearbox oil
Currently to fill the R380 I run a bit of pipe under the sill, over the chassis and into the filler and then use gravity to do the job. Is there an easier way ? I was thinking of like a garden sprayer type pump, put the oil in and then pump up the jam (sprayer) and then fill with the pipe.
But, not sure the pipe would be the correct bore to do the job with any speed.
Any other thoughts? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #287416 3rd Dec 2013 8:22pm
View user's profile Send private message View poster's gallery Reply with quote
ibexman



Member Since: 13 Dec 2008
Location: Essex
Posts: 2945

United Kingdom 
How about pipe and a funnel from engine bay or a suction pump Thumbs Up
Post #287423 3rd Dec 2013 8:29pm
View user's profile Send private message View poster's gallery Reply with quote
StephenO



Member Since: 03 Dec 2010
Location: Glasgow
Posts: 246

Scotland 
What you've described above is exactly what I use, bought it out of Homebase for about 12 quid. Saves a lot of hassle. Thumbs Up 2007 Defender Puma Tonga Green

2015 Range Rover Sport Autobiography Corrie Grey
1968 Series 2a Bronze Green
1995 Defender 90 Coniston Green
2005 Discovery 3 Zambezi Silver
Post #287428 3rd Dec 2013 8:36pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

United Kingdom 
I've got a garden sprayer for this very purpose. It's slow but controllable and mess free. I've put a short length of rigid pipe in the end of the flexible tube, which helps it stay in place in the filler hole. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #287432 3rd Dec 2013 8:37pm
View user's profile Send private message View poster's gallery Reply with quote
Phatcat



Member Since: 01 Nov 2013
Location: W yorks
Posts: 98

United Kingdom 2002 Defender 90 Td5 CSW Java Black
I've always used a gear oil pump bought from machine mart for about 15 kwid. Looks like a grease gun with a flexy tube on the end. It's quick, clean and cheap.
Post #287443 3rd Dec 2013 8:40pm
View user's profile Send private message View poster's gallery Reply with quote
Lou Sparts



Member Since: 15 Apr 2012
Location: Kent
Posts: 1501

United Kingdom 2005 Defender 90 Td5 XS CSW Zambezi Silver
When changing my gearbox oil i feed a piece of plastic pipe from near the brake servo down to the filler hole and insert a funnel into the hose and simply pour the oil int the funnel and let gravity do the rest. 2005 Td5 90 XS

Steve
Post #287488 3rd Dec 2013 9:14pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5843

United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
So maybe my idea of the sprayer is a good one... Also good for axles & transfer case 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #287490 3rd Dec 2013 9:16pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5697

2006 Defender 110 Td5 USW Zermatt Silver
Garden sprayer for me too. Works really well if oil nice and warm.

Andy
Post #287491 3rd Dec 2013 9:19pm
View user's profile Send private message View poster's gallery Reply with quote
jimbob7



Member Since: 06 Jul 2013
Location: uk
Posts: 2055

Lou Sparts wrote:
When changing my gearbox oil i feed a piece of plastic pipe from near the brake servo down to the filler hole and insert a funnel into the hose and simply pour the oil int the funnel and let gravity do the rest.


This /\/\/\ £1 fer a meter of 12mm (ish) clear pipe ,another £1 ferra funnel.You can just about see the filler hole from the engine bay. You can just about do the axles with pipe and funnel,it is a bit slow with the oil being so thick. Pov.spec,ftw. 2006, 110,TD5.
Post #287536 3rd Dec 2013 11:27pm
View user's profile Send private message View poster's gallery Reply with quote
Carlosbeldia



Member Since: 13 Oct 2013
Location: Cartagena
Posts: 43

Columbia 2001 Defender 110 Td5 SW Epsom Green
You can use a hand fuel pump for boats, it costs around 10 pounds here in COlombia, you can find it in any boat store. Mine can fill the gearbox with ATF in about 4 minutes. The transfer goes for about 10 minutes....
Post #287548 4th Dec 2013 4:37am
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5697

2006 Defender 110 Td5 USW Zermatt Silver
"Fill the gearbox with ATF"

Should that not be MTF? Or do you prefer ATF?

Andy
Post #287550 4th Dec 2013 4:43am
View user's profile Send private message View poster's gallery Reply with quote
Carlosbeldia



Member Since: 13 Oct 2013
Location: Cartagena
Posts: 43

Columbia 2001 Defender 110 Td5 SW Epsom Green
I have a problem here with MTF, it's extremely expensive, about 6 times the cost of ATF (Land Rover one is about 10 times more expensive). My gearbox only used it during 20.000 km (bests of his life, I think, it was really smooth those km). Right now the gearbox have 230.000 km and have some issues, it's going to be done a full maintenance on april 2014, so from then I'll start using Honda's MTF (have a new job right now so can afford the extra cost). With MTF I would think this manual fuel pump must be even faster...
Post #287618 4th Dec 2013 2:16pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

United Kingdom 
I am a bit of a fan of the oil safe products http://www.oilsafesystem.com/oss-oil-safe/...s-and-Lids think difflock.com sell them here in the UK. They are not the cheapest, but they work flawlessly. I use the hand pumping version with the hook type end for the R380 filler hole, works a treat.
Post #287854 5th Dec 2013 8:38am
View user's profile Send private message View poster's gallery Reply with quote
Carlosbeldia



Member Since: 13 Oct 2013
Location: Cartagena
Posts: 43

Columbia 2001 Defender 110 Td5 SW Epsom Green
This is the one I have

Post #287895 5th Dec 2013 11:42am
View user's profile Send private message View poster's gallery Reply with quote
kevb



Member Since: 03 Apr 2012
Location: AllPackedUp
Posts: 34

I have the oilsafe pump too, wasn't cheap but must have had it 10 year s now so its paid for itself. very happy with it.
Post #287953 5th Dec 2013 4:27pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums