Home > Technical > Nanocom 1 |
|
|
JWL Member Since: 26 Oct 2011 Location: Hereford Posts: 3443 |
I've got a bit of a problem with my Nanocom 1, nothing to do with it's operation, it's the fact that I can't get one of the buttons to work. Sods law dictates that it has to be the most important one, the one to the left that activates most of the commands. I had a quick look inside tonight and whilst yes a replacement switch could be soldered in, there is a little gadget on the underside of the pcb.
So the long and short of it is, does anybody know who can repair one of these at a reasonable cost. It's not a big hurry, the laptop can sort out the important bits and at the moment it opens up in instument mode. I was just been curious as it is only mildly irritating at the moment. |
||
16th Aug 2013 10:37pm |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 |
Mine had to go back to Italy for some EPROM work, did not take long and was pretty cheap postage
|
||
17th Aug 2013 5:36am |
|
diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6092 |
Found them! these jobbies, TACT switch
And, as per usual, much cheaper on ebay than from RS! |
||
18th Aug 2013 7:28am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis