 | Home > Td5 > More comfy seats |
 
|
|
|
| adafish Member Since: 30 Mar 2009 Location: atherstone Posts: 1381   
|
SEE OTHER QUESTION
 Putting Dreams on Drives at JLR Solihull.. |
||
16th Jun 2013 10:41pm |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
With a bit of ingenuity you can fit pretty much anything. In my last 110 I had seats from a Classic Rnage Rover, which were great.
The biggest challenge is usually maintanining access to the underseat boxes. Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
17th Jun 2013 6:22am |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6090 
|
I've got disco1 seats in the project90.
Just made up some adaptors from flat bar. It's better if you remove the bulkhead behind them (well, it is if you're big like me) as you can push the "back" of the seat back a bit to fit your lankey legs in (like me LOL) I only paid £30 for the pair of seats, so it needn't be an expensive convesion. Even SWMBO thinks they're comfy, and for her to say anything positive about a LR is quite something! |
||
|
17th Jun 2013 6:39am |
|
| GUM97 Member Since: 05 Feb 2012 Location: Cheshire Posts: 3555 
|
A mate of mine fitted some MG ZS seats into his pretty easily. Very comfortable
 An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948"  |
||
|
17th Jun 2013 6:50am |
|
| johnnyd Member Since: 13 Apr 2013 Location: Chippenham Posts: 1006 
|
How easy were the MG seats to fit, i am practical, but don't have any machining tools ?
JD 2008 TDCi 2.4 XS CSW |
||
|
17th Jun 2013 6:56am |
|
| TD5_90 Member Since: 02 Apr 2011 Location: Perthshire Posts: 89 
|
I fitted recaro seats from an Alfa years ago. Fantastic! One of the best mods I have done.
I made adaptor plates from steel flat bar. One under each of the runners with the holes drilled for fixing down to the seat box and up into the runner. If that makes sense? |
||
|
17th Jun 2013 10:08am |
|
| johnnyd Member Since: 13 Apr 2013 Location: Chippenham Posts: 1006
|
Would these fit into a defender without a lot of fixing pain ?
http://www.ebay.co.uk/itm/BLACK-RECLINING-...#vi-ilComp Any other recommends....  2008 TDCi 2.4 XS CSW |
||
|
17th Jun 2013 2:24pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6090
|
Anything can be made to fit with a bit of ingenuity.
Shouldn't be too hard. A couple of pics of the disco seats in my 90: Click image to enlarge Click image to enlarge And this post shows how I cut the bulkhead to give some more room <----- CLICKY PS... i got your PM on the weekend... was out with SWMBO most of it so couldn't arrange a meeting with you. Last edited by diesel_jim on 17th Jun 2013 3:45pm. Edited 1 time in total |
||
|
17th Jun 2013 2:35pm |
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2945
|
Can't see it Jim
|
||
|
17th Jun 2013 3:14pm |
|
| johnnyd Member Since: 13 Apr 2013 Location: Chippenham Posts: 1006
|
Thanks diesel_jim
Yeh i was a lot later getting back on Saturday also.....rain delayed me....... Quick Nanocom question as you have one, are they locked to a vehicle/ecu, what happens if i buy one and then change edu/vehicle ? JD 2008 TDCi 2.4 XS CSW |
||
|
17th Jun 2013 3:31pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6090
|
See what? |
||
|
17th Jun 2013 3:36pm |
|
| johnnyd Member Since: 13 Apr 2013 Location: Chippenham Posts: 1006
|
only the first pic link works in the seat message i think diesel_jim
JD 2008 TDCi 2.4 XS CSW |
||
|
17th Jun 2013 3:37pm |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6090
|
The nano i've got (an early one) only does defender and disco Td5. Had to get the unlock codes from nanocom to activate it, but it only does the Td5 anyway. think later ones can be unlocked to various types of vehicle (freelander/disco3/2/RR etc) |
||
|
17th Jun 2013 3:38pm |
|
| johnnyd Member Since: 13 Apr 2013 Location: Chippenham Posts: 1006
|
going slightly OT here on this thread, but.....can you backup your existing mappings/settings with a nano com before you remap? just incase it doesnt work as it should and you end up with a fewwawi ? 2008 TDCi 2.4 XS CSW
|
||
|
17th Jun 2013 3:41pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
