DEFENDER2.NET - View topic - Fuji 110 LS3 build

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Fuji 110 LS3 build

Page 63 of 63

3 ...

Print this entire topic ·

Zed

Member Since: 07 Oct 2017
Location: In the woods
Posts: 3344

2010 Defender 110 Puma 2.4 XS CSW Santorini Black

mcma1 wrote:
The rear camera? I will likely place it on the roof. I am really doing this to gain the reverse camera function without having a double din install, dash cam recording is just a bonus!

Got some M2 screws and could finally fit it up. Visors can got to vertical only as expected so I am going to buy some used ones from ebay tonight and cut/retrim them.

Click image to enlarge

Click image to enlarge

Click image to enlarge

The only negative beyond my control is the cable connections to the Wolfbox as they slot into the top so I am going to print a small cap/cover to hide them.

Into the headlining I have beefed up 2 of the 3 bolts holding the mirror bracket so that I can lose the 3rd bolt and dremel out a channel for the cables to feed up thru the bracket. I think this is about the best I can do given what i started with.

Click image to enlarge

Click image to enlarge

Click image to enlarge

Lovely job.
I can’t remember where I saw it but to hide the wiring somebody 3D prints a plate with a channel for the wires that sits under the 3 screws. WARNING.
This post may contain sarcasm.

23rd Jan 2025 9:31pm

pistonfields

Member Since: 29 Mar 2022
Location: Zurich
Posts: 76

Thanks for de detailed explanation. yes, the rear view camera. PO mounted one under the spare wheel on the tailgate. I likely would only use it when parking, so no need for me to see the tow hitch.
The 3d printed part looks brilliant, very well done. Would you mind sharing the 3d files? Then I could fire up my own printer if I get myself that rear view mirror... wife has been complaining recently how usefull it would be. Guess I'm cleared to spend the money then

24th Jan 2025 8:10am

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2921

Let me get it all fully fitted and then I can help out.

What would people say is the best view from a rear camera? I don’t need to see the towbar so I guess if I just catch the edge of the spare? Has anyone any pictures of there rear camera view on screen to share before I fix it to the roof?? Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

25th Jan 2025 10:19am

NoLimits

Member Since: 29 Dec 2022
Location: Somerset
Posts: 59

You can scroll up and down on the screen to adjust the angle, I mounted mine high up by modifying the rear washer with 2 cameras, one as a rear view and the other to look down to the tow bar (I currently don’t have a wheel on the back)

Click image to enlarge

This image shows the screen in its central spot looking straight out but it does have about 10 degrees of angle up and down, the picture also shows the reversing camera on the main screen, beware that even up there they do get dirty. I used to have one below the spare wheel and that would become useless after a few miles in the winter.

Click image to enlarge

I used Ram mounts to fix mine up and at some point I will directly wire those cables in through the back of the unit

Hope that helps

Click image to enlarge

26th Jan 2025 11:45am

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2921

Thanks for this, didnt know the angle had some adjustment in the setting

Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

26th Jan 2025 11:51am

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2921

Another update on the most over engineered Wolfbox install

Just got the power back on since Thursday night after the storm.

The modified leg so that the cables can pass thru it...

Click image to enlarge

Click image to enlarge

Then printed a connector cover which is still to be painted.

Click image to enlarge

Click image to enlarge

Some printed spacers so the cables can run behind the mount

Click image to enlarge

Click image to enlarge

So pretty much ready to fit it all up now. Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

26th Jan 2025 6:45pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10848

Loving this Andy, the fit will be spot on

Clayton.

1996 Golf Blue 300Tdi 110 Pick up.
Keeper.

27th Jan 2025 8:19pm

mcma1

Member Since: 16 Oct 2012
Location: Northern Ireland
Posts: 2921

Thanks Clayton. Got it fitted this evening, just the hardwire power to hook up next.

Click image to enlarge

Click image to enlarge Andy

2014 Fuji 110 SW LS3
https://www.defender2.net/forum/post751233.html#751233

2014 Corris 110 SW
http://www.defender2.net/forum/topic40056.html

My old Xtech 90 build..
http://www.defender2.net/forum/topic15681.html

LS3 V8 build...
http://www.defender2.net/forum/topic49051.html

27th Jan 2025 9:43pm

Page 63 of 63

3 ...

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum