Home > Td5 > Replacing sunroof seal |
|
|
revd Member Since: 20 Apr 2024 Location: England Posts: 130 |
Probably need this then; Sunroof Frame & Seal - AWR3321 - Genuine £604, from Rimmer Bros
|
||
20th Dec 2024 7:51am |
|
4RF RDS Member Since: 19 Jul 2015 Location: Ottawa Posts: 940 |
That is the correct part. Only the whole thing not just the rubber. 🤨. Pic your requested. 👇🏻
Click image to enlarge 2010 Range Rover MkIII Autobiography Super Charged (Idris) 2003 Range Rover Mk III (Desmond FitzWilliam) 2000 Defender 110 CSW TD5 (CTX) 1992 Range Rover Classic (Lizzy) 1972 Series III 300 Tdi (Stanwood) 1967 MGB GT Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats. H. L. Mencken (1880 - 1956) |
||
20th Dec 2024 1:51pm |
|
Oldowner Member Since: 26 Dec 2018 Location: South west Posts: 625 |
I have found that the original seal for the twist handle sunroof is long lasting, usually what causes leaks is where the roof hasn’t been operated for six months over the winter, the seal can stick to the glass on the rear corners and when operated it lifts the seal out of the frame and unseats it; the seal will then not seat in the frame properly unless it is fed back into position in the frame by hand.
They can also leak from the roof to outer frame fitment, this seal is foam strip and can go flat and leak over time - the inner rubber / felt trim can be removed and the sunroof frame unscrewed (torx self tappers), the outer frame can then be lifted and bedded back down again on decent sealant. |
||
21st Dec 2024 7:37am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis