DEFENDER2.NET - View topic - Squeaky clutch?.....Easy mod!

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Squeaky clutch?.....Easy mod!

Page 3 of 3

Print this entire topic ·

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20299

I’m not sure what size it was, but the grease nipple I put in there was the same as the UJ’s if I remember rightly.
You can soon tell as if there is a thread there it will screw in with finger tips.
It’s definitely small and only the coupler nipple. ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

11th Mar 2024 7:13pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 1988

I can confirm that you require a 1/4" UNF and not 6mm grease nipple as I ordered a 1/4" UNF 90 degree nipple and fitted it. The thread “felt” exactly right as I screwed it in by hand and nipped up with a spanner. Noting if it’s pointing the wrong way when tight , as mine was, you can use a 6mm flat washer to pack out and get it to point in the correct direction once tightened.

Many thanks to Blackwolf for investigating and highlighting the correct size and thread within the shaft.

Edit: when I said 6mm washer I meant an M6 washer . My grease nipple was about 180 degrees out, I.e pointing towards the lower end of the bulkhead, the M6 washer was approx 1mm thick and allowed the nipple to face forward and up when tight. The perfect position to couple to the grease gun.

Last edited by Ianh on 24th May 2024 10:14am. Edited 1 time in total

23rd May 2024 6:56pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3410

2012 Defender 90 Puma 2.2 CSW Santorini Black

If the 90degree grease nipple ... 1/4"UNF has 28TPI, converting into metric, pitch is about 0.9mm. So if you can find a 0.50mm thick washer, the grease nipple might end up facing the direction you would certainly prefer.

I have an M6 grease nipple waiting to go in

Not too worried, its a relatively short thread, and only need to go in 1 time. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

24th May 2024 5:29am

khamuul

Member Since: 14 Oct 2017
Location: Teutoburg Forest
Posts: 24

2007 Defender 110 Puma 2.4 SW Tonga Green

Fitted a 1/4" 90 degree grease nipple on my LHD puma. Thanks for sharing!

Click image to enlarge

15th Jun 2024 10:07pm

Page 3 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum