↓ Advertise on Defender2 ↓

Home > My Defender > Baltic blue 110usw
Post Reply  Down to end
Page 15 of 15 <123 ... 131415
Print this entire topic · 
L110CDL



Member Since: 31 Oct 2015
Location: Devon
Posts: 10739

England 
Great maintenance your doing on the 110 Bow down 1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.
Post #1028561 18th Mar 2024 9:24pm
View user's profile Send private message View poster's gallery Reply with quote
Siwynne



Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

England 
I’ve been busy as two weeks ago whilst towing a very heavy trailer uphill from Preston on the M6 the engine shuddered and started to smoke and knock. I pulled over to the hard shoulder and slowly made my way off the motorway. I limped home suspecting a damaged piston or ring. So engine out and stripped to find no 2 piston badly scored and the scraper ring broken. The cooling jet was blocked

Click image to enlarge

This dot at the tip of the knife was the culprit. A rebore and a rebuild later
3days work so far and I’ve still got to put the rad and intercooler back in.

Click image to enlarge




Click image to enlarge
Post #1031716 15th Apr 2024 9:39pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3413

Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
One little tiny piece can cause havoc Shocked 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #1031727 16th Apr 2024 4:34am
View user's profile Send private message View poster's gallery Reply with quote
Siwynne



Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

England 
All back in and running. Starter motor refused to seat properly and took me two hours of fiddling to get in. Just got to go steady and small journeys to begin with.
The ecu has called for an oil service on first start up. Little does it know the oil is cleaner than it’s ever been. I replaced the oil pump while it was in bits as it was part of the kit bought from lymm engine components (top service from them).
Post #1032449 22nd Apr 2024 7:09pm
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3413

Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Did you go for the gear type oil pump? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #1032492 23rd Apr 2024 5:26am
View user's profile Send private message View poster's gallery Reply with quote
Siwynne



Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

England 
No. The 2.2 needs a feed blocking to fit a 2.4 pump. There is a garage near to me who advertises this swap and he has been very freely giving with time and information on putting geared pumps into a 2.2. He has done it hundreds of times so fairly sure he’s has it right. He showed me all sorts of data on oil pressure he has gleaned when putting different oils into 2.2 and 2.4 converted pumps. Interesting but not at the same time.
The pump was part of a generic rebuild kit so went in. I will probably swap it for a geared one at a later date if this build lives long enough
Post #1033925 6th May 2024 7:04am
View user's profile Send private message View poster's gallery Reply with quote
Siwynne



Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

England 
Busy summer hols again. Many miles covered.
Dash had to come out again to put a new gear on the new wiper motor. Don’t know why but it just ate the teeth.
Overheated on a long drive due to low coolant. Could not find the leak despite having pressure testing gear then the radiator showed its hand and split properly so a new rad and stat went in. Still carrying water as a backup.
Thinking about removing the now defunct egr cooler and cutting that leak potential out of the system
Post #1043881 26th Aug 2024 8:26am
View user's profile Send private message View poster's gallery Reply with quote
Siwynne



Member Since: 04 Nov 2016
Location: West lancs
Posts: 578

England 
The coolant leak finally showed. Head gasket was leaking so I fitted a new one and full timing kit while the head was off and therefore the timing cover. Done at 149000 It’s so much smoother now it’s back together. This probably occurred due to the big intercooler, remap, de restriction of inlet, exhaust and uprated turbo cartridge.
Cars are making demands of me lately. New def 90 needs a service, 79 vw t2 is mid brake overhaul, 68 vw beetle needs the same due to lack of use and slk Merc will get a gearbox oil change this week. I love it really.

Click image to enlarge



Click image to enlarge
Post #1049298 21st Oct 2024 8:34am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 15 of 15 <123 ... 131415
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums