DEFENDER2.NET - View topic - Td5 rear axle breather

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > Td5 rear axle breather

Page 2 of 2

Print this entire topic ·

Register

Member Since: 11 Jun 2023
Location: London
Posts: 82

Thanks for the advice. I get a genuine warm feeling when I can infer it’s fine for a bit.

All good removing the breather so no internal pressure, just need to park up with a lean to OSR corner and I’ll have the facts.

Otherwise it’s a search for parts on the way from Granada to Algeciras, or whatever Morocco has to offer. Everything's a hammer.

31st Jan 2024 3:06pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

At the very least look to get the seals and lock nuts DHL'd out to you. Defo get them overnighted as spares. Did you pack a hub nut socket?

For reference it is a 52mm socket. IIRC a number of tractors use the same size so if you have not got one you should be able to find one in Spain.

1st Feb 2024 11:28am

Register

Member Since: 11 Jun 2023
Location: London
Posts: 82

Just as was relaxing into an occasional top up of gear oil, you've now rattled me.

Almost enough tools for a rebuild but certainly not a 52mm spanner. Everything's a hammer.

1st Feb 2024 8:22pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Do not worry too much and sorry I didn’t mean to rattle you. I am positive you will be able to find a 52mm socket or box spanner out in Spain. I suspect there might even be a Def2 forum member out there with one you can borrow. Worth asking…

1st Feb 2024 10:05pm

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5707

2006 Defender 110 Td5 USW Zermatt Silver

Don’t rebuild whilst away. If you are desperate to do something, which it doesn’t seem you are, get a new cap for the end of the shaft / drive flange.

2nd Feb 2024 5:19am

Register

Member Since: 11 Jun 2023
Location: London
Posts: 82

Thanks both for input.

In truth I’m desperate to do nothing apart from top up fluid if necessary.

No issue sorting it when I get back, but right now it’s all a bit roadside. Everything's a hammer.

2nd Feb 2024 9:50am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17387

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Santana uses/used the same hub arrangement so it is probably quite easy to find a 52mm box spanner (or the Santana special tool) in Spain if necessary.

Somewhere I have a note of the part number of the Santana tool, if I can find it I will post it here.

Update: found it, it is 161952.

Last edited by blackwolf on 2nd Feb 2024 12:18pm. Edited 2 times in total

2nd Feb 2024 10:58am

Register

Member Since: 11 Jun 2023
Location: London
Posts: 82

thanks for that.

A bit of local knowledge may prove to be a good thing.

Hopefully on the drive in London

Everything's a hammer.

2nd Feb 2024 12:12pm

Register

Member Since: 11 Jun 2023
Location: London
Posts: 82

Thanks all for your advice to date.

I’m still on the road with limited leakage overnight but otherwise all good.

Any thoughts on this (which comes highly recommended 😂) before I add some to the diff?

Click image to enlarge

Thanks Everything's a hammer.

15th Feb 2024 5:34pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum