↓ Advertise on Defender2 ↓

Home > Technical > unidentified disconnected cable connector Defender 2007 Puma
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
PeterA



Member Since: 04 Feb 2016
Location: Devon
Posts: 9
United Kingdom 2007 Defender 110 Puma 2.4 PU Fuji White
unidentified disconnected cable connector Defender 2007 Puma
Defender 110 fitted with puma engine 2007.

I have just had to fit a new starter motor and whilst underneath found a disconnected cable. I can not see where it would go and appears to have a very short lead from the cable harness.
It is a single spade connector which considering the age seems quite bright but it has two wires connected to it one is Black with green stripe and the other appears to be blue with either orange, brown or red stripe. It is located on the left hand side of the engine

Click image to enlarge
behind what I believe to be the oil pressure sensor. I have identified the part with an arrow on the picture.

I have searched the wiring and connector databases but can't seem to get a match with the connectors wire colours

Everything with the defender appears to be working with no faults indicated

Can anyone identify it please
Post #1046483 22nd Sep 2024 2:59pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6604
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
The “spade” you can see is plastic, and is on the blanking plug fitted to the connector in the factory. It isn’t supposed to fit anywhere.  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #1046487 22nd Sep 2024 3:10pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
PeterA



Member Since: 04 Feb 2016
Location: Devon
Posts: 9
United Kingdom 2007 Defender 110 Puma 2.4 PU Fuji White
Thank you Martin I must admit I didn't check to see if it was metal. In the light I was working in it certainly looked like bright metal but now you have said it I can see the inserted blanking piece
Post #1046489 22nd Sep 2024 3:19pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums