↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Bonnet letters refit after refurb…
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Paddy Dakar



Member Since: 27 Jan 2024
Location: North Wales
Posts: 14
Wales 2007 Defender 110 Puma 2.4 HT Cairns Blue
Bonnet letters refit after refurb…
Letters were removed with a little bit of heat and trim tool, scotchbrited, plastic primed then rattle can painted Matt black.

Before I removed, the letters were traced onto some 2 inch masking tape, for spacing.


Click image to enlarge

Placed tape straight on cutting mat, lined up straight edge along bottom of letters.


Click image to enlarge



Click image to enlarge



Click image to enlarge

Used more 2 inch tape on top to hold in place, then some clear application tape over all (layered 2inch tape would also work if you can’t get app tape)


Measured and marked centre line on letters, used 1 inch tape lined up with bottom of bonnet for guide, centre lined that also.



Click image to enlarge


Click image to enlarge

Lay the lot in position, hinge back,remove adhesive protection film, fold all into position and press each letter down.


Click image to enlarge




Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge


Click image to enlarge

Basic stuff, but might help someone 👍
Post #1039875 13th Jul 2024 6:55pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 509
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Thanks Paddy, will be doing something similar soon,

From the centre line whats the distance to the back of the D in LAND and then to the front of the R in ROVER

Very Happy

Shane
Post #1040000 15th Jul 2024 10:35am
View user's profile Send private message View poster's gallery Reply with quote
Paddy Dakar



Member Since: 27 Jan 2024
Location: North Wales
Posts: 14
Wales 2007 Defender 110 Puma 2.4 HT Cairns Blue
Hi Shane,

If you look at the pic above with my measuring tape the centre line is at the 330mm point which is also the start of the R in rover and the other measurement you were looking for is at the 215mm mark which is 115mm away from centre line (330-215=115) 👍

I’ve enlarged it below for you!



Click image to enlarge
Post #1040020 15th Jul 2024 2:08pm
View user's profile Send private message View poster's gallery Reply with quote
Zed



Member Since: 07 Oct 2017
Location: In the woods
Posts: 3306
United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Santorini Black
Nice work mate. WARNING.
This post may contain sarcasm.
Post #1040027 15th Jul 2024 5:42pm
View user's profile Send private message View poster's gallery Reply with quote
shanecl



Member Since: 20 Mar 2013
Location: Louth
Posts: 509
Ireland 1989 Defender 90 V8 Petrol CSW Auto Firenze Red
Paddy Dakar wrote:
Hi Shane,

If you look at the pic above with my measuring tape the centre line is at the 330mm point which is also the start of the R in rover and the other measurement you were looking for is at the 215mm mark which is 115mm away from centre line (330-215=115) 👍

I’ve enlarged it below for you!



Click image to enlarge


Perfect, Thanks Paddy Very Happy
Post #1040079 16th Jul 2024 9:20am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums