 | Home > In Car Electronics > Power for dab aerial |
 
|
|
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6610   
|
The purple with green stripe is the one you want.
Black is negative Red/orange stripe is illumination  1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
25th May 2024 2:49pm |
|
| Mo Murphy Member Since: 01 Jun 2008 Location: Letchworth Garden City, Herts Posts: 2244 
|
Is there not a 12v output on the stereo harness usually dedicated for electric aerials but no reason why it wouldn't supply a dab aerial ?
Mo The Land Rover 90 - Many are called, few are chosen. 50 Shades of Pennine Grey |
||
|
25th May 2024 2:56pm |
|
| Penfold_6290 Member Since: 22 Sep 2021 Location: Dorset Posts: 320 
|
As mentioned above most stereos have a 12v output used for aerials or amp switching. In the ISO harness it is a blue wire.
|
||
|
25th May 2024 7:02pm |
|
| fatboyron Member Since: 28 Jul 2018 Location: Aylesham Canterbury Kent Posts: 116
|
silly question guys but what sort of cable should get. Would 0.5mm cable be okay kind of like speaker wire its one of those jobs you just need a bit of advice on the bits to use
|
||
|
26th May 2024 6:25pm |
|
| Penfold_6290 Member Since: 22 Sep 2021 Location: Dorset Posts: 320
|
Wire size will depend on current draw. I can’t imagine that requires a lot of power, the rating of the fuse will be the clue, but most likely 0.5sqmm would be adequate over a short distance.
|
||
|
26th May 2024 6:32pm |
|
| fatboyron Member Since: 28 Jul 2018 Location: Aylesham Canterbury Kent Posts: 116
|
Thank you everyone finally got it working this morning. I use those cable connectors and some cable and then rap to all in black material tape then I really tidy job a bit of squeeze getting it all in
Click image to enlarge Click image to enlarge |
||
|
27th May 2024 10:23am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
