DEFENDER2.NET - View topic - dash bbulb replacement

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > dash bbulb replacement

Page 1 of 1

Print this entire topic ·

joetetley

Member Since: 09 Dec 2010
Location: leeds west yorkshire
Posts: 46

1995 Defender 110 300 Tdi SW Epsom Green

dash bbulb replacement

Hi all to replace bulbs behind dash in my defender temp gauge and speedo do i need to disconnect any wiring to get proper access to bulbs
thanks

22nd Nov 2011 7:09pm

Fifth Horseman

Member Since: 08 Mar 2011
Location: Lanarkshire
Posts: 328

2011 Defender 110 Puma 2.4 XS CSW Santorini Black

You don't "need" to but as its only a couple of plugs that are not interchangeable (one for speedo & gauges and one or two for the warning lamp module) it makes access so much easier if you unplug the instrument panel and work with it on your lap or on the bench.

22nd Nov 2011 7:54pm

joetetley

Member Since: 09 Dec 2010
Location: leeds west yorkshire
Posts: 46

thanks for help

22nd Nov 2011 7:58pm

VOD80

Member Since: 10 Nov 2011
Location: Toulouse
Posts: 17

2003 Defender 110 Td5 CSW Zambezi Silver

I've just done this. As said, it is one connector for the instruments and two for the warning lights. I found it was better to have the dash panel out as some of the lights were a bit of a fiddle to get back in. It was nice to be doing it in the warm

23rd Nov 2011 8:14am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum