↓ Advertise on Defender2 ↓

Home > Technical > Brake help please
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Outlaw1



Member Since: 11 Aug 2016
Location: east sussex
Posts: 268
England 2010 Defender 110 Puma 2.4 USW Santorini Black
Brake help please
Hi all , I think i have a issue with my brakes but do not know where to start looking for problem .
2010 110 usw
Apply brake pedal pressure as normal and it feels spongy but if i take pressure of at halve way point and reapply . The brakes work as they should.
Checked fluid , which was correct level.
I would like to resolve this before becoming a issue .Any ideas ?
Many thanks John
Post #1014792 11th Nov 2023 11:48am
View user's profile Send private message View poster's gallery Reply with quote
ickle



Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1785
France 2008 Defender 110 Puma 2.4 CSW Alpine White
Check your wheel bearing play -
HTH Keith
Post #1014794 11th Nov 2023 12:07pm
View user's profile Send private message View poster's gallery Reply with quote
MarkBrown



Member Since: 03 Oct 2022
Location: Mid Wales
Posts: 474
Wales 1983 Defender 110 Other HT Auto Keswick Green
Yes, second the above. Jack up the wheels individually and check for play in the wheel bearings. This is because the design is such that if a wheel bearing is loose it will move from side to side and push back the caliper pistons. This then means that when you pump the brakes the first push takes up the gap between the caliper piston and disc, the second applies pressure.

Or they might need bleeding, usually due to be a leaky seal at the caliper or split pipe/ union / perished hose.

If they only do this when hot, a good start would be to change the fluid - the darker it is the older it is, as a guide.

Hope this helps.
Post #1014797 11th Nov 2023 12:21pm
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2420
Chile 2007 Defender 110 Puma 2.4 SW Chawton White
It sounds like air in the system. Now uf you push the pedal up to a hard point and then travels further down then the master cylinder could be the culprit. Puma 110" SW

.............................................................
Earth first. Other planets later
Post #1014802 11th Nov 2023 12:55pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums