Home > Td5 > Bonnet release cable issue |
|
|
Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2641 |
There should be a lever that can be pulled to release the latch.
|
||
18th Aug 2022 8:30am |
|
Retroanaconda Member Since: 04 Jan 2012 Location: Scotland Posts: 2641 |
Visible on the latch here:
|
||
18th Aug 2022 8:33am |
|
rallysteve Member Since: 10 Feb 2014 Location: Cumbria Posts: 2227 |
Indeed it is possible but is a bit of a faff. From memory when i had to do this on mine (after reassembling the front end and realising i had forgotten to connect the cable just as i pushed the bonnet down to close it ) i recall using a small spanner to pry the lever to open the latch. You might find putting a little downwards pressure on the front of the bonnet makes the latch slightly easier to operate.
At least you dont have an A-bar, spotlights and winch as it makes getting the grille off so much more tricky! Steve 02' 110 TD5 Double Cab Rebuild Thread |
||
18th Aug 2022 8:42am |
|
turnah Member Since: 30 Sep 2018 Location: Lancashire Posts: 40 |
Sorted, thank you very much everyone!
I managed to create a device out of a hacksaw to pull the lever. Quick wiggle of a wire and engine back in business too. |
||
18th Aug 2022 8:44am |
|
lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2755 |
Now fit a device to stop thieves opening your bonnet so easily !!
|
||
18th Aug 2022 1:48pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis