DEFENDER2.NET - View topic - Cleaning Recommendations Please

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Cleaning Recommendations Please

Page 1 of 1

Print this entire topic ·

Alun

Member Since: 22 Dec 2015
Location: Snowdonia
Posts: 34

2011 Defender 90 Puma 2.4 PU Santorini Black

Cleaning Recommendations Please

Can anyone recommend a cleaning approach to removing the film that's built up on my black Defender? It has a galvanised hardtop which has "leeched" onto the paintwork shown in the photos

Thanks in advance for any help or pointers

Click image to enlarge

21st Jul 2021 12:30pm

Mdm

Member Since: 11 Sep 2013
Location: Sunny Lancashire
Posts: 1599

a good detailer would take a lot of that out but its well engrained into the paint

would be good to machine polish the car and throw some proper wax on top.

21st Jul 2021 1:00pm

Griff90bowler

Member Since: 24 Feb 2021
Location: Cowbridge
Posts: 128

Red 7 👍

21st Jul 2021 1:28pm

Ianh

Member Since: 17 Sep 2018
Location: Essex
Posts: 2001

Do a smal test area first, but my recommendation would be :-

Try bilt hamber korrosol https://bilthamber.com/product/korrosol/

Give it a wash and dry , Followed by a clay bar

Then use farecla G3 regular grade paste compound. https://www.farecla.com/products/g3-regula...pound/%5B/

Use a slightly damp microfibre cloth to apply in small areas at a time and add a little spray of water as the paste drys to keep the paste working. Moving the cloth up and down and side to side then in a random circular motion to finish. Then use a standard polish over the top in the same way, then buff with a different microfibre cloth.

Clays, polish and wax here https://bilthamber.com/product-category/waxes-polishes-clays/

Do test areas to see how well it performs, it should take most marks out but deeper scratches in the clear coat will need a da polisher with the right combination of pads and varying abrasive level compounds.

21st Jul 2021 3:40pm

Alun

Member Since: 22 Dec 2015
Location: Snowdonia
Posts: 34

Thanks Ian

4th Aug 2021 8:29pm

Snowy90

Member Since: 23 Feb 2015
Location: Surrey
Posts: 482

2008 Defender 90 Puma 2.4 XS CSW Fuji White

+1 on the clay bar just as mentioned a good wash first, they are very gentle on the paintwork but should be used with a purpose made lubricant usually bought with the bar.

After a good quality wax should make it easier to wash off as clearly it will happen again.

if the bar doesn't work, then a buff with a good compound around 3000 grit should work, im sure the detailers will add some science!

5th Aug 2021 8:58am

Alun

Member Since: 22 Dec 2015
Location: Snowdonia
Posts: 34

5th Aug 2021 12:38pm

X4SKP

Member Since: 29 Nov 2013
Location: Berkshire
Posts: 2295

2010 Defender 90 Puma 2.4 SW Stornoway Grey

15Minutes to watch... 3Hrs to Copy... good clean 'fun'

SKIP
https://www.defender2.net/forum/topic83242.html

18th May 2022 12:23pm

mattc

Member Since: 10 Apr 2019
Location: Cheshire
Posts: 73

I had a similar issue with the back of my Defender when I got it. I washed it thoroughly, used a clay bar, then used Meguiars Ultimate Compound. That removed the deposits and the scratches. I then used a fine polish to make it even shinier. It takes some elbow grease but it's easier if you have a DA polisher you can borrow.

Click image to enlarge

18th May 2022 12:53pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum