↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > How much fluid is needed to flush clutch master cylinder?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Angus_Beef



Member Since: 30 Apr 2015
Location: Oslo
Posts: 434
Norway 2015 Defender 110 Puma 2.2 SW Corris Grey
How much fluid is needed to flush clutch master cylinder?
Greetings gentlemen

Im about to replace my clutch master cylinder with a Lof Powermaster and need to know how much dot 4 brake fluid to buy.
I can buy in quantities of 250ml or 1L. Asking because I never want to save brake fluid once opened ... Roaming around 🇳🇴🇨🇭
Post #913169 20th Jul 2021 6:13am
View user's profile Send private message View poster's gallery Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3414
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
Not on a tdci, but used less than half a bottle of 250ml on an lt77 master/slave. And that was with some accidental waste as the slave piston got pushed out (engine is still out).
PS. I use dot5. That stuff seems to come in 250ml only bottles locally as is damn expensive. Reason for dot5 - if the master leaks, it does not eat the paint off the bulkhead. Something to consider?

https://www.defender2.net/forum/topic78646.html 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #913189 20th Jul 2021 8:44am
View user's profile Send private message View poster's gallery Reply with quote
Leamreject



Member Since: 19 Dec 2020
Location: Middle Earth - Leamington Spa
Posts: 970
Italy 2011 Defender 90 Puma 2.4 HT Fuji White
As a precaution I would avoid using Dot 5, it may not damage your paintwork but is silicone based and can’t be mixed with dot 3,4 or 5.1.

It’s not really intended for road vehicle use. Ride like you stole it!!
If I’m not on a bike it’s because only a 4x4 will do…
2011 2.4 Puma 90 HT
Post #913193 20th Jul 2021 8:51am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Dinnu



Member Since: 24 Dec 2019
Location: Lija
Posts: 3414
Malta 2012 Defender 90 Puma 2.2 CSW Santorini Black
I do not think the clutch hydraulic is a critical component. But I also do not know why dot3/4 is specified for the clutch fluid. I hear somewhere that manufacturers just specified dot3/4 for the less technical people so that they do not mix up brake and clutch fluid.

How many people wanted to buy the 710 fluid? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black
Post #913214 20th Jul 2021 11:44am
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5703
2006 Defender 110 Td5 USW Zermatt Silver
I used LOADS. was a Censored too bleed. Had to get reserves in.
Post #913284 20th Jul 2021 6:58pm
View user's profile Send private message View poster's gallery Reply with quote
LandymanStefan



Member Since: 30 Aug 2017
Location: Surrey
Posts: 881
England 2001 Defender 90 Td5 SW Epsom Green
Just got a lof powerslave delivered. Is it ok to use dot 5.1 in a td5 clutch systemas i already have some in the garage.
Thanks
Post #931404 27th Nov 2021 11:02am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums