DEFENDER2.NET - View topic - Rear exhaust mount

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Rear exhaust mount

Page 1 of 1

Print this entire topic ·

Rescue01

Member Since: 17 Jul 2015
Location: Aberdeen
Posts: 98

Rear exhaust mount

Looking for some advice. 2011 2.4puma 110. Rear exhaust mount snapped this morning and I’ve cable tied it on for now. I can’t get under it till next week. So it’s the rearmost mount that’s connected to the rear crossmember. Is this mount meant to be welded or bolted to the crossmember? Also is it an item I can purchase? Also any recommendations as to where.

I’m working all weekend so just want to see if I can order a bit just now.

Thanks for looking.

29th Oct 2021 9:23am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3409

2012 Defender 90 Puma 2.2 CSW Santorini Black

I am not very familiar with 110 chassis, but my TD 90 has the welded bracket (as all model years) and a bolt on bracket. It is part 11 in below link. But the mount would probably bot be in the correct position anymore.

https://www.lrworkshop.com/diagrams/land-r...r_53434#11 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

29th Oct 2021 10:36am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3409

A picture, from a 90 with 2 hangers, not best angle to view though.

Click image to enlarge 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

29th Oct 2021 10:38am

rallysteve

Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2225

2002 Defender 110 Td5 DCPU Keswick Green

Actual hangar is bolted on, hopefully it is this bit that has broken rather than the bracket on the chassis (see Dinnu's pic above which is essentially same as a 110 one). See here for the part (no. 8 )
https://www.lrworkshop.com/diagrams/land-r...stem_45012

Cheers,
Steve 02' 110 TD5 Double Cab Rebuild Thread

29th Oct 2021 11:25am

Rescue01

Member Since: 17 Jul 2015
Location: Aberdeen
Posts: 98

Thanks all that’s great. I hope it’s just the bracket and not the chassis mount.

👍

29th Oct 2021 12:03pm

Hufflepuff

Member Since: 25 Oct 2014
Location: Hampshire
Posts: 727

I'm late to the party, but here are some snaps from the rear of my Richards Chassis v8 110 for reference:

Click image to enlarge

Click image to enlarge

The peculiar stainless steel bracket going down to the exhaust came with the exhaust kit itself (double S exhausts) and I would expect your mount to the bracket to be different. The chassis bracket is welded in place on mine for reference. 2005 Td5 90 XS
1989 V8 110 CSW

30th Oct 2021 5:46pm

Rescue01

Member Since: 17 Jul 2015
Location: Aberdeen
Posts: 98

Thanks all. Part ordered. I’m off on Thursday so hopefully it’s just a case of bolting on the new bit. If not I might be asking for recommendations for a decent mig welder. 🤣

2nd Nov 2021 7:42am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum