DEFENDER2.NET - View topic - What happened? (shuddering)

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > What happened? (shuddering)

Page 1 of 1

Print this entire topic ·

Rednaxela

Member Since: 23 Sep 2019
Location: UK
Posts: 41

What happened? (shuddering)

Hi,

Stock 300Tdi 90

Less than a couple of miles from cold into a journey today, I was on a quiet side road pulling up to a junction, so doing less than 20mph and reducing speed. Suddenly there was a bit of rough shuddering and a struggle for forward momentum.

The shuddering sound/feeling was coming from, generally, under the seatbox or a bit forward of that.

At the same time the steering and steering wheel wanted to pull to the left and it seemed slightly reluctant to be easily turned the other way. I decided to head home, and turned around and set off, which again there was a bit of shuddering but then after getting up to speed, everything was fine, as if nothing at all had happened.

Sounds unlikely but I'm hoping it was some gravel caught in a propshaft yoke, causing this power loss and jamming it hence sending the vehicle sharply to one direction.

I should add that every time I start it and reverse after the handbrake being on for a while there is a bit of a clunk, even when I release the handbrake and push the vehicle by hand (I was doing this recently to push it onto the flat before jacking it to do a task).
The A frame ball joint has been replaced, yet I read somewhere that with some kits the washer they come with isn't thick enough resulting in the nut not being tight enough, however mine was lemforder so I'm assuming I'm fine in this regard.

What do you think? Thanks for reading.

5th Jan 2020 7:35pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1788

2008 Defender 110 Puma 2.4 CSW Alpine White

Stone in the calliper / disc?

5th Jan 2020 7:55pm

shropshiredefender

Member Since: 05 Jun 2017
Location: Shropshire
Posts: 834

2011 Defender 110 Puma 2.4 USW Santorini Black

Propshaft U.J? Just because you're offended doesn't mean you're right.

5th Jan 2020 8:00pm

Rednaxela

Member Since: 23 Sep 2019
Location: UK
Posts: 41

At the time it seemed like a serious problem, I just don't think it would be from somthing caught in the brakes but I can have a careful look for any fresh scratching/scoring tomorrow.

Front propshaft is only 1000+ miles old, the rear isn't but seems sound.
When cruising along at speed everything sounds good.

5th Jan 2020 8:19pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20466

Sounds a big like a failed UJ bearing at a guess from symptoms. No Guts, No Glory.
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

5th Jan 2020 8:19pm

GREENI

Member Since: 22 Aug 2010
Location: staffs
Posts: 10383

I fixed a neighbour’s that did this, I thought a bolt holding the handbrake onto the t/box had come out and was jamming in the drum...I was right that time!

5th Jan 2020 8:22pm

doublecabjon

Member Since: 28 Sep 2014
Location: Dorset
Posts: 31

Greeni suggestion gets my vote, check the hand brake drum fixings. Perhaps try backing the adjuster right off and trying again- obviously being cautious as the hand brake will have little effect if needed.

5th Jan 2020 8:51pm

Tompoole

Member Since: 05 Jun 2011
Location: Bucks
Posts: 827

sticking handbrake or calliper.
my guess is handbrake binding

Have fun be happy

5th Jan 2020 9:06pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2247

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

Panhard rod bush failure ? Can set up a strong juddering vibration and difficulty steering.

Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

5th Jan 2020 9:18pm

Rednaxela

Member Since: 23 Sep 2019
Location: UK
Posts: 41

Thanks for the suggestions this sounds like it.

5th Jan 2020 9:45pm

jst

Member Since: 14 Jan 2008
Location: Taunton
Posts: 8077

2011 Defender 110 Puma 2.4 USW Stornoway Grey

Jamming cv? Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop

6th Jan 2020 8:07pm

Rednaxela

Member Since: 23 Sep 2019
Location: UK
Posts: 41

I removed the handbrake drum - all was fine. Good opportunity to bench grease the rear propshaft anyway and I saw that the bolts holding the A frame upper link brackets to the chassis were a bit loose which should help explain some clunking.

I don't have any of the typical symptoms of a bad CV. The vehicle turns smoothly lock to lock with no clunking.

7th Jan 2020 2:39pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum