DEFENDER2.NET - View topic - Wiring up discovery 300tdi into early 90 loom

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Wiring up discovery 300tdi into early 90 loom

Page 1 of 1

Print this entire topic ·

Ae-Richy

Member Since: 11 Feb 2016
Location: Dumfries
Posts: 2

Wiring up discovery 300tdi into early 90 loom

Hi there. I am currently building a hybrid 88” for off-roading. I am using a discovery chassis and running gear. It is a 300tdi auto that I am using as a donor car. I have the bulkhead mounted from an early 90 mounted (glass fuses fitted) ! I was wondering if anyone has any wiring guides/diagrams of what and where I need to mate everything up to?? Any help would be very much appreciated! Cheers folks.

31st Jan 2019 9:44pm

Procta

Member Since: 03 Dec 2016
Location: Sunderland
Posts: 5208

Might worth you looking for a second hand Defender 300 TDi full loom to make everything plug and play, Or look into using the disco loom into the defender.
But my money would be on finding a defender 300 TDI loom. I have done an engine conversion before in a rover metro, and i replaced the full electrics with a later R100 system, which made things more OEM and plug and play.
The last thing you want is faffing about

Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

8th Feb 2019 6:59pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum