↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > sound proofing 110 roof and bonnet
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Stacey007



Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3754
United Kingdom 
sound proofing 110 roof and bonnet
Hello


I've used silent coat and closed cell on the truck rear boot, rear seats, seat boxes and driver / passenger footwells also the front doors and box's


I think the biggest improvement was the seat box?


Anyway I have left the roof as taking the headlining off concerns me, and also nothing under bonnet?


Are these two other areas worth doing?


Thanks
Post #665784 20th Nov 2017 4:22pm
View user's profile Send private message View poster's gallery Reply with quote
mk1collector



Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769
England 2004 Defender 110 Td5 CSW Bonatti Grey
The roof if done well will make a big difference, as for the bonnet, sound deadening doesn't stop noise so it won't cut down engine noise only resonance from the bonnet itself. Ray
My build thread
http://www.defender2.net/forum/topic17615.html
Post #665789 20th Nov 2017 4:30pm
View user's profile Send private message View poster's gallery Reply with quote
bankz5152



Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2173
2004 Defender 110 Td5 DCPU Epsom Green
Headlining removal seems like an enormous task but its actually quite straight forward and simple. Just buy some more of the "tree" fixtures as you'll no doubt break/damage a few.

I used Fatmat (Dynamat alternative, just as good, half the price) and acoustic eggshell foam usually used in studios and and the like for the roof. Stuck the foam down with high temp spray adhesive. Made quite a big difference

I wasn't concerned with the foam soaking up water as my roof was totally water tight, though I did run some silicone over any joints first.
Post #665791 20th Nov 2017 4:36pm
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 818
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
I used this on the underside of the bonnet and very pleased with it. Was considering doing the roof in the hard top as well, as the finish looks neat enough...

https://www.dodomat.com/collections/thermo...stic-liner
Post #665797 20th Nov 2017 5:15pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums