DEFENDER2.NET - View topic - Dynamat installation

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Dynamat installation

Page 1 of 1

Print this entire topic ·

TVM

Member Since: 18 May 2016
Location: Dubai
Posts: 35

Dynamat installation

All

Need advice on installing Dynamat extreme to the hood.

- Do you cut the sheet to fit/paste into the spaces where there is no double layer in the hood
- Do you then put an overall cover using Dynamat Hood liner to make it look neater? Is Hood liner required?
- Any pictures would be helpful?

Cheers TVM

10th Aug 2016 7:26am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20190

Have a look on the CSK Land Rovers site, Chris used to have lots of good photos on there.
What you've said sounds right to me, I decided against fitting any under there myself though.

I'm sure you are already savvy enough to ow to wear gloves when fitting, it has edges like razor blades when cutting abd fitting in.

10th Aug 2016 10:25am

MartinK

Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2664

2011 Defender 110 Puma 2.4 USW Orkney Grey

This is the thread you need (prob what Steve refers):
http://www.defender2.net/forum/topic19837.html?highlight=dynamat

Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)

10th Aug 2016 11:15am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20190

Yep, some good ones there.

10th Aug 2016 1:05pm

TVM

Member Since: 18 May 2016
Location: Dubai
Posts: 35

Thanks Guys

Will go through the info

cheers
TVM

10th Aug 2016 1:15pm

Riverboy

Member Since: 16 May 2016
Location: French sector, Earth
Posts: 1288

2014 Defender 90 Puma 2.2 SW Corris Grey

Had mine lined with a 19mm hood liner and it's certainly helped cut down on engine noise. I can't say how it was fitted though as I didn't do it.

Click image to enlarge

10th Aug 2016 1:17pm

TVM

Member Since: 18 May 2016
Location: Dubai
Posts: 35

Thanks Riverboy

That's the picture I was after. Do you have Dynamat extreme beneath the Hoodliner?

Steve/Martin

Thanks for the thread and quite useful info. The thread has the complete picture of installation. The only one missing is relating to hood!!

I think I will do the Dynamat extreme first to the areas that can be fixed under the hood and then do a hoodliner

Cheers
TVM

11th Aug 2016 7:07am

Riverboy

Member Since: 16 May 2016
Location: French sector, Earth
Posts: 1288

I'm not sure to be honest. The guys that did it did the whole car and did an amazing job so I suspect they did. In the main cabin they added new carpet trim to exposed areas and I wasn't expecting that. If you are doing it yourself then yes I would add as much as you can.

Given your location, you should see a big improvement in heat insulation if you are doing the entire car. It's made a massive difference to mine.

11th Aug 2016 7:35am

MartinK

Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2664

Argh... lol - "Hood" = bonnet

I thought "Hood" = roof lol

Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)

11th Aug 2016 3:12pm

TVM

Member Since: 18 May 2016
Location: Dubai
Posts: 35

No worries Martin

Managed to get the Dynamat extreme fixed to hood in patches followed by Hoodliner. Definitely lot better. Also managed to fix some to the foot well and the middle row floor.

Cheers TVM

14th Aug 2016 8:43am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum