↓ Advertise on Defender2 ↓

Home > In Car Electronics > terminals on a britpart 9000c winch
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Crasher



Member Since: 17 May 2014
Location: Douglas
Posts: 6
Isle Of Man 1997 Defender 110 300 Tdi CSW Bonatti Grey
terminals on a britpart 9000c winch
Hi.
Sorry to ask such a simple question but which is the negative connection for a britpart 9000c winch. As you look at the two teminals it looks like it is the left side terminal that is negative ( lead runs to battery). My winch has two black cables running from the on/off switch so not sure. Just want to check

Thanks in advance.
Post #462243 11th Oct 2015 9:20am
View user's profile Send private message View poster's gallery Reply with quote
Mike_B



Member Since: 23 Jan 2011
Location: Moray
Posts: 550
United Kingdom 2006 Defender 110 Td5 USW Java Black
Do you have any images of the motor? Usually there are three studs: F1, F2 and an earth. The earth is often on the underside of the motor. Tthe F1 and F2 are the winch-in and winch-out configurations.

Are you wiring it using the original solenoid box or albright solenoid?
Post #462279 11th Oct 2015 1:00pm
View user's profile Send private message View poster's gallery Reply with quote
Crasher



Member Since: 17 May 2014
Location: Douglas
Posts: 6
Isle Of Man 1997 Defender 110 300 Tdi CSW Bonatti Grey

Click image to enlarge
Hi Mike

I have attached a couple of pics

This is the original winch nothing changed.

As you can see from the picture with the top view the positive in on the left and negative on the right. The second picture shows the cable from the switch to the terminals that cross over, hence why I have connected the cables as I have, Red Right and black left.

When I first went to connect the negative to the battery I got a load of big sparks, which made me wonder if I have the cables connected properly. Didn't want to change anything over until I was sure which way round they should be.

Or is it that I should have connected the negative first and then the positive.

THe winch cables are not connected to the battery now.

Thanks for your time for such a simple question

Click image to enlarge



Click image to enlarge
Post #462322 11th Oct 2015 5:14pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums