DEFENDER2.NET - View topic - 110 wiper motor check/removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > 110 wiper motor check/removal

Page 1 of 1

Print this entire topic ·

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

2009 Defender 110 Puma 2.4 USW Baltic Blue

110 wiper motor check/removal

Wiper Motor

Can anyone tell me the easiest way to get into the wiper motor on my 2009 110 defender. Just cannot figure how to get in at it.

The fuse was blown I have replaced it but wipers still not working and new fuse ok.

Thanks

2nd Oct 2015 10:53am

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Dash out unfortunately. A few pointers here perhaps? It may be just the park switch?

http://www.defender2.net/forum/topic21058....iper+motor

http://www.defender2.net/forum/topic38828....iper+motor If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

2nd Oct 2015 10:58am

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Thanks that's a good start I can progress with this.

2nd Oct 2015 11:57am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17242

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

You can remove the wiper moter without actually removing the dash, but you do need to remove all the dash fasteners so that you can pull the enture dash a few inches away from the bulkhead. It isn't difficult, but equally isn't a job for the faint-hearted.

I've actually done it in heavy rain at the roadside mid-journey when the wipers conkied out once! All part of the experience that is Defender ownership.

2nd Oct 2015 12:28pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

That's interesting another option I will probably tackle this with a friend who is a bit more experienced in mechanics than me. Hopefully between the 2 methods we can give it a go.

Thanks

2nd Oct 2015 12:40pm

Crofter

Member Since: 19 Feb 2015
Location: Peterhead
Posts: 169

Thanks for the help we undid the screws at the passenger side that's the top Torqs, side ones at the door and the underneath one at the foot well checked we had voltage to the motor. My friend noticed rust on the spindle at the passengers side I have been spraying the spindle on the outside with WD40 and the wiper now appears to be working.

Thanks guys for your help. I do not know if I am too impressed with the design having to dismantle so much if the motor requires changing.

3rd Oct 2015 5:44pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum