DEFENDER2.NET - View topic - TD5 fuel pressure regulator hose refit into cylinder head

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 fuel pressure regulator hose refit into cylinder head

Page 1 of 1

Print this entire topic ·

Branny

Member Since: 16 Nov 2014
Location: Morzine
Posts: 9

TD5 fuel pressure regulator hose refit into cylinder head

Hi All,

New to the forum so usual excuses as I'm not a experienced mechanic.

I refitted the FPR in my TD5 in the summer to fix a leak, leaving the copper and hose return line from the head in place (the one that exits at viewers right on the FPR and runs to the front end of the block), bolting it back into the new FPR. This has now failed at one of the hose unions. I just had a look at removing this hose assembly from the cylinder head and it appears next to impossible! Any advise very welcome as a search of the web seems to offer up lots of advise on the FPR refit but without mention of this difficult to get at hose. I have crows foot spanners but can't get them in. Does this require a specialist deep sidecut socket?

Any advise very welcome.

16th Nov 2014 12:50pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

HI welcome

I used one these

I.e. brake pipe nut spanner

16th Nov 2014 1:09pm

Branny

Member Since: 16 Nov 2014
Location: Morzine
Posts: 9

Hi Dorsetsmith. Thanks. Just took the angle grinder to a deep socket only to find that its still too restricted to get in! Spanner, meet angle grinder. Assume that you did this from the top and that it was not easy...

16th Nov 2014 2:23pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

its not an easy job

16th Nov 2014 2:30pm

Branny

Member Since: 16 Nov 2014
Location: Morzine
Posts: 9

Any more info on this would be gratefully received. One modified 14mm spanner later, I could just about mount it, but there is then not enough space turn it! Jow the heck is this thing installed initially?!

16th Nov 2014 3:57pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1620

Would say it's fitted with the manifold off in the first instance.

17th Nov 2014 12:13am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum