DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > D44 Cab Filter

Page 1 of 1

Print this entire topic ·

deep down

Member Since: 02 May 2012
Location: France
Posts: 204

2007 Defender 110 Puma 2.4 DCPU Zambezi Silver

D44 Cab Filter

After passing 2 weeks of following (not always following)other 4x4s' on dusty roads etc, the amount of dust entering the cab was too much to say the least. We came up with a temporary solution to reduce the dust, very basic, a piece of T Shirt under the air intake. Kind of worked.

So I've been searching the sites and came across the D44 Cab Filter, has any one tried it? Does it work?

http://www.devon4x4.com/index.php?page=sho...;Itemid=14

Cheers

16th May 2013 8:17pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20343

I'd be interested to know the thoughts of who's got one. I'd be tempted but it's not a cheap mod to say the least. Might keep water out of there more too.

$W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

16th May 2013 8:23pm

pope10001

Member Since: 15 Oct 2011
Location: Dulverton
Posts: 489

1992 Defender 90 200 Tdi HT Zermatt Silver

I have one which i use in the UAE desert and it is very good. I would suggest getting the pollen filter as well, as its a finer filter it keeps a lot more of the dust and sand out of the air in the cabin. Its a really good mod and in my opinion really worth the money.

Regards,

Mark

17th May 2013 5:54am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20343

How about fitting on top of the vent if you have chequer plate wing tops like mine does? $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

17th May 2013 8:03am

d j hutton

Member Since: 30 Jul 2009
Location: Dorset
Posts: 1044

2011 Defender 110 Puma 2.4 USW Orkney Grey

custom90steve wrote:
How about fitting on top of the vent if you have chequer plate wing tops like mine does?

The cab filter requires no drilling and is compatible with most chequer plate wing tops.

DJ 1989 200tdi 90 csw
2011 110 usw Orkney grey

Buy British 🇬🇧

Defender Clothing Designs available at http://www.rangesports.com/acatalog/Defender-Stuff.html

17th May 2013 8:13am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20343

I assume it fits and seals around the same edge and diameter as the original? I just thought I'd ask as the CP obviously is proud of the actual wing and not flush. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪

17th May 2013 8:15am

pope10001

Member Since: 15 Oct 2011
Location: Dulverton
Posts: 489

Yes Steve it does. The bottom half bolts into e original holes, the filter then goes over the top and then the top half bolts onto the bottom half sandwiching the filter..

17th May 2013 1:12pm

deep down

Member Since: 02 May 2012
Location: France
Posts: 204

Thanks for the feedback, looks like something else on the purchase list for the next trip.

17th May 2013 1:25pm

deep down

Member Since: 02 May 2012
Location: France
Posts: 204

Fitted the cab filter yesterday, not really required in winter but ready for the next trip to Morocco.

It also comes with 4 extra filters in red, green, blue and yellow.

There's no gasket with it which I would have expected and as I have the chequer plate I put a bead of gasket sealer around the edge of the mating plate.

Click image to enlarge

14th Nov 2013 7:37am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum