↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Alarm/central locking not working
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
stevie



Member Since: 16 Sep 2008
Location: Nottinghamshire
Posts: 246
United Kingdom 
Alarm/central locking not working
Today whilst driving down a rough track at work the tow bar bottom out and made an almighty bang and then the hazard lights started flashing. I tried pressing the hazard light switch but this had no effect on the flashing lights, so I turned the engine off and the lights stopped flashing, then I started up and carried on as normal.
I ve just got home and parked up and pressed the key fob to arm the alarm and lock the doors and nothing happened. Tried locking the driver door and this only locks the drivers door. Quickly checked all the fuses that relate to the alarm and all seem fine.
Anyone any ideas what could be wrong? Is there another fuse under the bonnet for the alarm?
Post #205511 26th Jan 2013 12:51pm
View user's profile Send private message View poster's gallery Reply with quote
mk1collector



Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769
England 2004 Defender 110 Td5 CSW Bonatti Grey
Are the tow bar electrics smashed? The wires may be shorting against each other.
Post #205520 26th Jan 2013 1:31pm
View user's profile Send private message View poster's gallery Reply with quote
Caterham



Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6295
England 2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey
could there be an earth damaged also - this can cause sperious things to happen - but as about would start with checking the tow electrics are all ok?
Post #205522 26th Jan 2013 1:49pm
View user's profile Send private message View poster's gallery Reply with quote
stevie



Member Since: 16 Sep 2008
Location: Nottinghamshire
Posts: 246
United Kingdom 
Tow bar electrics all fine as they are mounted up near the rear cross member. It was the bottom of the adjustable tow pack that hit the floor.
Post #205527 26th Jan 2013 2:15pm
View user's profile Send private message View poster's gallery Reply with quote
stevie



Member Since: 16 Sep 2008
Location: Nottinghamshire
Posts: 246
United Kingdom 
Just been out to have another look. Still did not work. So I turned on the ignition on and pressed the buttons on the remote. Turned the ignition off, closed the door, then pressed the key fob and it is now working. No idea what has caused it or how it's fixed itself Confused Will mention it when in for its next service or before if it happens again.
Post #205531 26th Jan 2013 2:35pm
View user's profile Send private message View poster's gallery Reply with quote
Supacat



Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018
United Kingdom 2013 Defender 110 Puma 2.2 XS DCPU Keswick Green
Don't thnk it is anything to worry about.

I had this happen to me a few years ago, albeit in a Diso on a heavily corrugated road. i was driving too fast and tripped the inertia switch.

Soft reset is switching off and on again after a set period of time.
Post #205691 26th Jan 2013 9:10pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums