Home > Tdi > clutch master cylinder leaking |
|
|
paulgrs2 Member Since: 11 Dec 2011 Location: Pickering, North Yorkshire Posts: 39 |
dot 4 is right mate yeah. Have you reset the stop screw correctly and the push rod adjustment so that the rod runs straight through it's cycle.
140mm pedal to floor pedal height and 1.5mm clearence between pushrod and cylinder piston (approx 10mm at pedal). Last edited by paulgrs2 on 20th Oct 2012 7:58am. Edited 2 times in total |
||
4th Oct 2012 7:57pm |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 8018 |
does the car stop in a straight line? ie is there a resistance somewhere causing premature failure? Cheers
James 110 2012 XS Utility 130 2011 M57 bespoke Camper 90 2010 Hardtop 90 M57 1988 Hardtop |
||
4th Oct 2012 8:21pm |
|
Lou Sparts Member Since: 15 Apr 2012 Location: Kent Posts: 1501 |
Is your clutch very heavy ? maybe if it is the master cylinder is having to work at pressures it was not designed to do. When i had a new clutch fitted to my old Turbo Diesel years ago the new clutch was much lighter.Just a thought. 2005 Td5 90 XS
Steve |
||
4th Oct 2012 8:30pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis