↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Cleaning Chequer Plate
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Landlord



Member Since: 27 Oct 2009
Location: Hampshire
Posts: 582
United Kingdom 2007 Defender 90 Td5 HT Cairns Blue
Cleaning Chequer Plate
I have cheque plate on the bonnet and wings. Always said I would not bother but was persuaded in to it in the end to aid getting to storage on the roof rack when camping. It's now been on for the past three years, it's the anodised plate but is starting to look a bit grubby. I have pressure washed it and used brushes of various stiffness but can't get the black grime off around the raised chequer bits.

Any suggestions on what to use be it chemical or mechanical to clean up the plate without scratching or damaging the anodising ? 2007 TD5 90 Hard Top
Post #166650 6th Sep 2012 6:26am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8021
 2011 Defender 110 Puma 2.4 USW Stornoway Grey
petrol? Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #166652 6th Sep 2012 6:28am
View user's profile Send private message View poster's gallery Reply with quote
diesel_jim



Member Since: 13 Oct 2008
Location: hiding
Posts: 6092
United Kingdom 2006 Defender 110 Td5 SW Epsom Green
I've heard that pan cleaning sponges (the slightly abrasive plastic ones, so they won't actually scratch the ali, not like the wire wool type stuff) work well.

Don't know what chemical to use though. maybe jif? (or cif, if you've got a lithp Laughing )
Post #166653 6th Sep 2012 6:33am
View user's profile Send private message View poster's gallery Reply with quote
JWL



Member Since: 26 Oct 2011
Location: Hereford
Posts: 3443
England 2002 Defender 110 Td5 SW Coniston Green
When I gave mine a bit of a clean to spray it black I used some kitchen surface cleaner, to the eye it did the job very well, needed a bit of work with a decent stiff bristled brush to work it into all the nooks and crannies though!
Post #166654 6th Sep 2012 6:59am
View user's profile Send private message View poster's gallery Reply with quote
strang



Member Since: 16 May 2012
Location: Happy Valley
Posts: 1380
United Kingdom 2009 Defender 90 Puma 2.4 XS CSW Galway Green
I uesd to have a series two fire appliance which had quite a bit of chequer plate on it. When I spoke to folks at shows with full size fire engines, quite a few of them recommended using 'brown sauce' (yes really) as a cleaning agent!

This is for untreated chequer plate of course, and annodized stuff may react in a different way. Euro-Leafing to infinity and beyond.....
Post #166683 6th Sep 2012 11:49am
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20347
United Kingdom 
WD-40? $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #166692 6th Sep 2012 12:44pm
View user's profile Send private message View poster's gallery Reply with quote
MartinK



Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2665
United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
Someone on here a while back said he used wheel cleaner (i.e. wonder-wheels type stuff) to good effect.

Not sure I would want that all over the paintwork tho... Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)
Post #166696 6th Sep 2012 1:05pm
View user's profile Send private message View poster's gallery Reply with quote
Landlord



Member Since: 27 Oct 2009
Location: Hampshire
Posts: 582
United Kingdom 2007 Defender 90 Td5 HT Cairns Blue
MartinK wrote:
Someone on here a while back said he used wheel cleaner (i.e. wonder-wheels type stuff) to good effect.

Not sure I would want that all over the paintwork tho...


Thats the issue with chemicals, dont want to damage paintwork.

The grime is the stubborn stuff at the bottom of the raised chequer bits which are hard to remove with a brush. Might try some wheel cleaner carefully on it ! 2007 TD5 90 Hard Top
Post #166749 6th Sep 2012 4:31pm
View user's profile Send private message View poster's gallery Reply with quote
MartinK



Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2665
United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
Found the thread:
http://www.defender2.net/forum/topic8437.html Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)
Post #166755 6th Sep 2012 4:50pm
View user's profile Send private message View poster's gallery Reply with quote
fekete



Member Since: 24 Dec 2008
Location: Here on the other end of the computer
Posts: 3626
United Kingdom 2007 Defender 90 Puma 2.4 HT Bonatti Grey
jst wrote:
petrol?

Thumbs Up the only thing that work properly NEVER TAKE LIFE SERIOUSLY. NOBODY GETS OUT ALIVE ANYWAY
Post #166767 6th Sep 2012 5:14pm
View user's profile Send private message View poster's gallery Reply with quote
Likeomg



Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640
2010 Defender 90 Puma 2.4 HT Stornoway Grey
can't it just be removed for cleaning? that way you can use chemicals you wouldn't normally want near the paintwork
Post #166934 7th Sep 2012 6:15pm
View user's profile Send private message View poster's gallery Reply with quote
Yetiman



Member Since: 13 Aug 2010
Location: London
Posts: 138
United Kingdom 
Try Britemax metal polish. Top stuff and not too pricey. I wouldn't lather it all over the paintwork but if any goes on it, just wipe off quickly and you'll be fine. If it's really grubby, some fine wire wool combined with the polish will soon sort it. They also do a sealer for metal that will protect it from dulling again in the future.

Cheers Thumbs Up She's not old...just older
Post #166953 7th Sep 2012 9:49pm
View user's profile Send private message View poster's gallery Reply with quote
Yetiman



Member Since: 13 Aug 2010
Location: London
Posts: 138
United Kingdom 
Try Britemax metal polish. Top stuff and not too pricey. I wouldn't lather it all over the paintwork but if any goes on it, just wipe off quickly and you'll be fine. If it's really grubby, some fine wire wool combined with the polish will soon sort it. They also do a sealer for metal that will protect it from dulling again in the future.

Cheers Thumbs Up She's not old...just older
Post #166954 7th Sep 2012 9:49pm
View user's profile Send private message View poster's gallery Reply with quote
110SEB



Member Since: 29 Jan 2009
Location: Essex, England
Posts: 1444
United Kingdom 2007 Defender 110 Puma 2.4 XS CSW Java Black
strang wrote:
I uesd to have a series two fire appliance which had quite a bit of chequer plate on it. When I spoke to folks at shows with full size fire engines, quite a few of them recommended using 'brown sauce' (yes really) as a cleaning agent!

This is for untreated chequer plate of course, and annodized stuff may react in a different way.


How about Coca Cola. We all know what it does to dirty coins.
Post #166961 8th Sep 2012 5:52am
View user's profile Send private message View poster's gallery Reply with quote
rustandoil



Member Since: 08 Sep 2012
Location: Cotswolds
Posts: 738
England 2005 Defender 110 Td5 XS DCPU Bonatti Grey
Alloy wheel cleaner worked in with a brass wire brush worked a treat on mine Thumbs Up
Post #166970 8th Sep 2012 7:00am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums