↓ Advertise on Defender2 ↓

Home > Tdi > Starting Issue - bit concerning. *** FIXED***
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
shaggydog



Member Since: 12 Aug 2012
Location: Kent
Posts: 3347
United Kingdom 1991 Defender 110 200 Tdi USW Arles Blue
Starting Issue - bit concerning. *** FIXED***
Hi guys,

Right got a starting issue here, let me run you through it.

Key in, wait for glow plug light to extinguish, crank. engine starts up runs for a second then dies.

Key in, wait for glow plug light to extinguish, crank, engine starts up fine, throttle applied, slight splutter, rpm picks up then runs fine and no issue for the rest of the day.

Has only happened yesterday and now this morning.

Its weird because it is still starting on its first revolution so its still happy, its just not running after the initial start but it is running fine once you have given it a slight rev and then for the rest of the day it will happily run, pulls fine, no more smoke than usual for a Tdi.

I have a theory it is an electrical issue - ether glow plug related or stop solenoid issue - how can I test this?

Only other thing I can think of is knackered injector or lift pump issue but if it was surely it wouldn't run happily?

Any thoughts welcome Smile

Last edited by shaggydog on 17th Oct 2014 3:02pm. Edited 1 time in total
Post #365139 17th Oct 2014 7:55am
View user's profile Send private message View poster's gallery Reply with quote
munch90



Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
England 
I would go down to route of air in diesel not glowplugs etc
Post #365140 17th Oct 2014 8:03am
View user's profile Send private message View poster's gallery Reply with quote
g-mack



Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967
United Kingdom 
split in your injector spill pipes? My 109 thread

my youtube channel
Post #365169 17th Oct 2014 9:54am
View user's profile Send private message View poster's gallery Reply with quote
shaggydog



Member Since: 12 Aug 2012
Location: Kent
Posts: 3347
United Kingdom 1991 Defender 110 200 Tdi USW Arles Blue
G-Mack you brilliant mind you! Thumbs Up

Had a look in and felt the pipes, guess what , no 4 was loose (again) and its spill of pipe has been rubbing on one of the High pressure injector pipes and looks like it has a weep so new ones on order and everything tightened up and moved clear.

Hopefully that should be the end of it!

Dog
Post #365199 17th Oct 2014 12:39pm
View user's profile Send private message View poster's gallery Reply with quote
munch90



Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
England 
new ones on order ? you can get the pipe from any motorfactors in one metre lengths and just cut to what you want , normally about 3-4 quid
Post #365201 17th Oct 2014 12:44pm
View user's profile Send private message View poster's gallery Reply with quote
shaggydog



Member Since: 12 Aug 2012
Location: Kent
Posts: 3347
United Kingdom 1991 Defender 110 200 Tdi USW Arles Blue
Good Point, will give them a ring and cancel the order.

Would that clear nylon pipe do ad a stop gap until it arrives?

I don't fancy leaking diesel into the engine bay or worse on the road.
Post #365202 17th Oct 2014 12:54pm
View user's profile Send private message View poster's gallery Reply with quote
munch90



Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
England 
no not diesel proof ,goes rock hard after a while . get the proper stuff any motorfactors will do it or even Halfords do it about £5
Post #365204 17th Oct 2014 1:01pm
View user's profile Send private message View poster's gallery Reply with quote
g-mack



Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967
United Kingdom 
Thumbs Up Thumbs Up
sounded just like what was happening to mine when i hadn't torqued up one of the banjo nuts!! as you hadnt been messing with your nuts {ooh er!} hose weas likely candidate!
glad it was quick and easy to sort! My 109 thread

my youtube channel
Post #365206 17th Oct 2014 1:11pm
View user's profile Send private message View poster's gallery Reply with quote
shaggydog



Member Since: 12 Aug 2012
Location: Kent
Posts: 3347
United Kingdom 1991 Defender 110 200 Tdi USW Arles Blue
Quote:
no not diesel proof ,goes rock hard after a while


Ohh did not know that! Thanks for the heads up!

Will toddle down to Halfords once the delivery man and the shed man have been.

One of those days - "we will deliver/collect between 8:30 and 17:00"

Quote:
sounded just like what was happening to mine when i hadn't torqued up one of the banjo nuts!! as you hadnt been messing with your nuts {ooh er!} hose was likely candidate!


As one of mine was on its way to loose I have a feeling the Copper washers have work hardened a bit so will make some new ones on Monday Very Happy

If its not the nuts, blame the hose! Whistle

Quote:
glad it was quick and easy to sort!


Me too Very Happy makes a welcome change to have an issue at 7.30, diagnose it at 10, and fix it by 11!
Post #365227 17th Oct 2014 2:30pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums