DEFENDER2.NET - View topic - Transfer Case Prop bolt removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Transfer Case Prop bolt removal

Page 1 of 1

Print this entire topic ·

John P

Member Since: 26 Dec 2013
Location: West Sussex
Posts: 312

2012 Defender 90 Puma 2.2 SW Corris Grey

Transfer Case Prop bolt removal

Is there a trick to getting the bolts out of the flange on the transfer case were it bolts to the propshaft? It appears in order to replace the bolts on the flange of the transfer case for the prop, one has to remove the flange and circlip. Or is it not worth it, and just replace the nyloc nuts using the existing bolts? Thanks John

2nd Jul 2023 1:18pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17338

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

The trick is to remove the flange and circlip!

If the bolts are in good order they can be reused indefinitely. Although ideally the stiff nuts should not be reused, provided that they are still stiff they can. You should get at least a couple of removals from them.

2nd Jul 2023 1:22pm

John P

Member Since: 26 Dec 2013
Location: West Sussex
Posts: 312

Thanks for the reply. Yes the bolts are in good shape. I have bought a kit, so will just use the new nuts.

2nd Jul 2023 1:29pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum