![]() | Home > Puma (Tdci) > Hard top bottom seals 90 |
![]() ![]() |
|
|
NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1679 ![]() ![]() ![]() |
Depends on year, if yours is a puma they tend to just have the one piece foam seal part no 3, it’s not a very good representation of it on the diagram.
This is what they look like https://yrmit.co.uk/product/side-panel-to-...fender-90/ |
||
![]() |
|
hjellemorten Member Since: 03 Oct 2022 Location: Bergen Posts: 28 ![]() ![]() ![]() |
Alright, it is a Puma 2007. The previous owner have used additional silicone. With only the item 3 “foam” seal, I would expect water to find places to sit over time and create 🤕 . Luckily this has not happened in my case.
Would it be recommended to apply a silicone joint all the way around between the lower and upper body? |
||
![]() |
|
shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 516 ![]() ![]() ![]() |
I bought the YRM seal for item 3, serious job
|
||
![]() |
|
hjellemorten Member Since: 03 Oct 2022 Location: Bergen Posts: 28 ![]() ![]() ![]() |
How is the YRM quality’s the genuine part?
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
