↓ Advertise on Defender2 ↓

Home > Td5 > Rear seats - What am I missing?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5842
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Rear seats - What am I missing?
Picked up a set of nice Exmoor trim seats for the 110. Started re-assembly today after getting frames powder coated.

All good except for one thing. The seats don't lock into the normal upright position.


Click image to enlarge

I think I can feel a hole under the fabric around the area I should have a locking pin?

Or it could be the bolt with the white plastic washer underneath is the locking pin? This has a tapered shoulder and I need to replace this with another bolt for the hinge to work ? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #991684 6th May 2023 3:35pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5682
2006 Defender 110 Td5 USW Zermatt Silver
My 110 seats (original) don’t have brackets there. Just on the C pillar.
Post #991685 6th May 2023 3:48pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5842
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Thanks LA. How do you stop your seats from folding forwards?
Mine is a 1999 TD5 maybe the C-Pillar catch came later? 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #991687 6th May 2023 3:53pm
View user's profile Send private message View poster's gallery Reply with quote
TexasRover



Member Since: 24 Nov 2022
Location: Paris
Posts: 1040
France 2002 Defender 110 Td5 DCPU Chawton White
I had a 1999 which had the latch on the c-pillar.
Post #991689 6th May 2023 4:33pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5842
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
The only catch I have is down towards the bottom of the sear base (has a sliding catch to release the seats)

This sliding catch stops the seat tipping forwards, but I have nothing to stop the rear back rest part of seat folding forwards. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #991693 6th May 2023 4:58pm
View user's profile Send private message View poster's gallery Reply with quote
Nutter



Member Since: 15 Sep 2014
Location: Birchington
Posts: 25
England 
Hello i think that catch locks the two seats together when up 60/40 and the one down the bottom should tip them.
Post #991706 6th May 2023 6:45pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5682
2006 Defender 110 Td5 USW Zermatt Silver
excossack wrote:
Thanks LA. How do you stop your seats from folding forwards?
Mine is a 1999 TD5 maybe the C-Pillar catch came later?


If you look at this add. He is selling the retainers that I have on the Cpost and no clips on the two parts of the seat

https://www.defender2.net/forum/topic86511.html
Post #991707 6th May 2023 6:46pm
View user's profile Send private message View poster's gallery Reply with quote
TexasRover



Member Since: 24 Nov 2022
Location: Paris
Posts: 1040
France 2002 Defender 110 Td5 DCPU Chawton White
Yes exactly that second picture is what I had on the 1999 which i retrofitted to my DCPU which normally has the rear seats fixed mounted with a bracket on each side giving you no access.

I had to make two brackets to secure the back side of these latching brackets.

Without them you would not have a lot of resistance to anything heavy sliding forward
Post #991708 6th May 2023 7:07pm
View user's profile Send private message View poster's gallery Reply with quote
excossack



Member Since: 22 Feb 2012
Location: North West
Posts: 5842
United Kingdom 1999 Defender 110 Td5 SW Caledonian Blue
Cheers chaps. I dont have that style seat back locking on mine. My seats are all locked at the bottom. Maybe due to being 33/33/33 seats.

However, I have it sussed. I remember two things.
1st - I had a set of seats in the loft - (dont we all) so I compared seat locking mechanisms and noticed its the same as the new seats I have and that there should be an extra pin/bolt for the catch to lock on to.

2nd - I had a bag of bits from the seller of the seats and a quick rummage revealed some spare / new pins/bolts

Turns out the fasbric covers a threaded insert. After I found this and careful use of a sharp knife I now have (circled in blue)



The seat backs now lock in position! Maybe tomorrows job is to swap the seats over. 1999 Defender TD5 110

Regards
John M0VAZ
Econet Station 48 no clock
Post #991718 6th May 2023 8:17pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums