DEFENDER2.NET - View topic - Exhaust fumes/connection

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Exhaust fumes/connection

Page 1 of 2

Print this entire topic ·

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

Exhaust fumes/connection

Hi all,

Defender-noob here so go easy!

Just bought my first at the weekend - 1996, had a replacement 300TDI engine put in it a few years back.

The previous owner didn't give it much love of late - low oil, coolant, power steering fluid etc etc so I've done all those bits.

I've noticed it gets mighty stinky when driving so on a further bit of investigation noticed the exhaust isn't connected - see the attached photo.

I've tried loosening off the bolt and pushing them back together but there's a fair bit of resistance.

Any support/tips would be great. Being new to this there is plenty to learn.

Cheers,

Will

Click image to enlarge

5th Apr 2023 7:09am

I Like Old Skool

Member Since: 23 Feb 2015
Location: Manchester
Posts: 822

1994 Defender 110 300 Tdi ST Coniston Green

Pretty sure that is the 200tdi manifold/exhaust. The 300tdi has a 3 stud triangular flange that the down pipe mounts to. If I remember correctly the 200tdi downpipe also bolts to the engine block via a bracket midway down the frontpipe so it could be this that is stopping you from moving the exhaust into the correct position?

5th Apr 2023 7:31am

I Like Old Skool

Member Since: 23 Feb 2015
Location: Manchester
Posts: 822

By the way, I guess this also means you have the 200tdi engine?

5th Apr 2023 7:32am

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

Thanks for the replies - I am still trying to get to the bottom of the story. The garage paperwork just says 'engine'!

Can I loosen off the bracket, loosen off these bolts, slot if back on and do everything up again? Does it need a bit of grease to create a seal?

Cheers

5th Apr 2023 7:35am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Can you share wider picture of the engine bay? Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

5th Apr 2023 7:39am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3469

2012 Defender 90 Puma 2.2 CSW Santorini Black

200tdi had top mounted turbo on a Defender, similar setup as the 19J with exhaust above inlet manifold. Different from a 300.

Interesting the location of the EGT probe. Would that not be cooler after the turbo (expansion from turbine)? 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

5th Apr 2023 7:57am

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

Click image to enlarge
Here you go

Click image to enlarge

5th Apr 2023 8:00am

htb2

Member Since: 02 Nov 2018
Location: Carmarthenshire
Posts: 535

200 Tdi, defender spec for sure.

5th Apr 2023 8:35am

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

A quick scrabble around underneath to look at the other part of the exhaust reveals it isn't attached.

Click image to enlarge

5th Apr 2023 10:55am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3469

There is a triangular coupling further down the exhaust pipe. You might have to loosen the 3 bolts just enough so that you can lift the down pipe enough to connect to the turbo outlet pipe. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

5th Apr 2023 1:08pm

Mdm

Member Since: 11 Sep 2013
Location: Sunny Lancashire
Posts: 1631

they are always fun to get them to line up.

best way is on a ramp.

with a proper downpipe clamp (new)

loosen all the exhaust and work your way down from the front to the back aligning as you go .

the downpipe bolts rarely line up on aftermarket exhausts

5th Apr 2023 1:46pm

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

Thanks - is this a relatively easy job? Also, that bottom part isn't bolted to anything so it's just going to rattle loose I think - are there specific bolts to re-attach this?

Thanks for taking the time to help.

5th Apr 2023 3:29pm

badshotleigh

Member Since: 03 Apr 2023
Location: Hook
Posts: 15

If anyone could help me out with the bolt sizes for re-attaching that would be great - I think they should be m10s? m10 50s?

Cheers

5th Apr 2023 5:18pm

I Like Old Skool

Member Since: 23 Feb 2015
Location: Manchester
Posts: 822

Mdm wrote:

with a proper downpipe clamp (new)

That is the proper clamp, and looks in reasonable condition. Maybe just get a new bolt for it if the old one is suffering?

6th Apr 2023 12:41am

I Like Old Skool

Member Since: 23 Feb 2015
Location: Manchester
Posts: 822

Just looking at the engine bay pics and there's something wrong here. What year is the vehicle? That looks like a very original 200tdi engine bay installation, everything is in the correct 200tdi location, even the fuel filter on the bulkhead and the power steering bottle are different on a 300tdi. Also the fan cowling is very deep, suggesting that the gearbox is the LT77 from pre-300tdi (the 300tdi was sat much further forward, to make room for a longer R380 gearbox I believe).

Your car looks like it has always been a 200tdi so would not be a 1996 vehicle unless it has had an odd military past or been a LR factory vehicle before being registered?

6th Apr 2023 12:55am

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum