 | Home > Technical > Puma door glass removal |
 
|
|
|
| ibexman Member Since: 13 Dec 2008 Location: Essex Posts: 2962  
|
It’s quite easy it’s only door card nuts bolts and screws
|
||
27th Aug 2020 9:38am |
|
| shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 516  
|
yep got that far, have you taken one out yourself
|
||
|
27th Aug 2020 9:40am |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
with the door card removed
 Click image to enlarge have the top window glass one inch up from top rubber seal so you that you hold it in place with clamp or tape and stop it from dropping down Click image to enlarge window winder to window fixing screws loosened so that sliding can be made free from the bottom of the window glass next Click image to enlarge remover window winder inner panel fixing screws and with the two window winder to window fixing screws loosened so you remover winder inner panel also disconnect and remover inner door lock opening lever Click image to enlarge with the window winder inner panel removed you can now remover the glass, at the bottom the hing end window channel you find self tipping screw remover it with now the tricky bit you will need to hold the window at the bottom end with the clamp or tape removed from the top you can work window out from the door frame Last edited by dorsetsmith on 27th Aug 2020 11:07am. Edited 9 times in total |
||
|
27th Aug 2020 9:59am |
|
| blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17610 
|
Edit - post deleted because the one above, which it crossed with, says it so much better.
|
||
|
27th Aug 2020 10:00am |
|
| dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Click image to enlarge
Yes Click image to enlarge removed from old door and fitted in to new drivers door Last edited by dorsetsmith on 27th Aug 2020 11:38am. Edited 1 time in total |
||
|
27th Aug 2020 11:09am |
|
| shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 516
|
Thanks @dorsetsmith, i was being gently trying to twist the glass but will try again moving in the direction in the photo
 |
||
|
27th Aug 2020 11:11am |
|
| shanecl Member Since: 20 Mar 2013 Location: Louth Posts: 516
|
Thanks blackwolf |
||
|
27th Aug 2020 11:11am |
|
| Polarismd Member Since: 13 Feb 2022 Location: Leicestershire Posts: 62
|
Hi,
Is there any chance someone could add the images back into this post? Thanks in advance. Chris |
||
|
19th Dec 2022 10:40am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
