DEFENDER2.NET - View topic - Britpart door seals

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Britpart door seals - review

Page 1 of 1

Print this entire topic ·

SJM2018

Member Since: 06 Jul 2018
Location: Bristol
Posts: 296

2011 Defender 90 Puma 2.4 XS CSW Aintree Green

Britpart door seals - review

I’ve seen the videos where people slag off the britpart seals, but at roughly 1/6 the cost I thought I’d give them ago… here are my observations:

Front door seals - these appear to be the old bearmach ones. They are made in India and are ok. The rubber is a little stiff, but the size and shape match the OEM seals that I removed.

However, I’m going to swap these out. My doors are perfectly adjusted and where as with the OEM seals I could push the doors shut, the Britpart ones require that I slam the door to get the second stage of the latch to engage. You could live with this, but I take our dogs out mega early and my neighbours would have a

if I kept slamming the doors early in the morning.

Rear door seal - made in china and are absolute gash. Really stiff, badly shaped, no flex in the metal reinforcement, not as wide (so there is a gap).

Again, I will be replacing.

General Britpart rant:

I just don’t understand why they can’t make decent parts. I would be happy to pay 2/3 times as much for stuff like seals (would still be a ~50% saving on OEM).

I feel like we’re stuck between Land Rover taking the

with the OEM prices and Britpart taking the

with shocking quality.

Conclusions:

Front door seals are probably ok. Rear door seal definitely not. 2011 CSW XS 90

27th Nov 2022 11:56am

Bluest

Member Since: 23 Apr 2016
Location: Lancashire
Posts: 4209

2007 Defender 110 Puma 2.4 XS CSW Java Black

Rubber parts in particular seem to be a problem for the aftermarket. Seals, bushes etc never seem right. I can only assume that in this regard the OEMs aren’t ripping us off and it costs OEM sort of money to get OEM sort of quality. 2007 110 TDCi Station Wagon XS

27th Nov 2022 12:07pm

northernerindevon

Member Since: 27 Feb 2018
Location: Bristol
Posts: 58

This comes up time and again. Door seals are worth paying Genuine for.

I balked at the cost when I replaced mine but they fit perfectly, are supple and work exactly as they should.

Sh*tpart? Just say no!

27th Nov 2022 12:29pm

SJM2018

Member Since: 06 Jul 2018
Location: Bristol
Posts: 296

Bite the bullet and bought some genuine seals - the rear door had developed a leak.

Massive improvement. Much softer, thicker and easier to fit.

Bought the Britpart stainless steel carpet rail for the rear edge as the existing one was rusted.

Actually fits really well and the screw holes line up (screws that came with it are too big

, but just used the old ones with a bit of ptfe tape). 2011 CSW XS 90

5th Dec 2022 10:30am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum