↓ Advertise on Defender2 ↓

Home > Technical > Door Switch EARTH
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
ScarboroughSeadog



Member Since: 21 Jul 2022
Location: Scarborough
Posts: 110
United Kingdom 2013 Defender 110 Puma 2.2 DCPU Keswick Green
Door Switch EARTH
Quickly diagnosed an alarm and interior light fault which looks to be due to a mashed up door light/alarm switch (see photo). The switch was earthing when the door was shut (so the vehicle thought the door was still open).
Anyway, the switch earths through the fixing screw, but the screw hole in the bodywork is now damaged and too large to either fix the switch securely, or provide a reliable earth.
Access is difficult to the rear of the screw hole. Any tips for how to provide a better fixing/earth here?
Just use a bigger screw is the obvious one, but the I/D of the hole in the switch unit prevents this.
Any thoughts/advice appreciated- I suspect someone has found a simple solution to this issue before me!

Click image to enlarge
Post #971994 22nd Nov 2022 11:39am
View user's profile Send private message View poster's gallery Reply with quote
rustandoil



Member Since: 08 Sep 2012
Location: Cotswolds
Posts: 738
England 2005 Defender 110 Td5 XS DCPU Bonatti Grey
Rotate the switch 180 degrees and drill a new hole for the screw...might not be too pretty
Post #971996 22nd Nov 2022 11:46am
View user's profile Send private message View poster's gallery Reply with quote
DSC-off



Member Since: 16 Oct 2014
Location: North East
Posts: 1402
United Kingdom 2015 Defender 110 Puma 2.2 XS CSW Aintree Green
I've not had the problem or ever had to fix it.
First thought, turn the switch upside down and fix with a new screw position above the plunger.
Check clearances and wire length. May need protection on the wire to prevent rubbing on the screw.

Just beaten with the post!
Post #971997 22nd Nov 2022 11:48am
View user's profile Send private message View poster's gallery Reply with quote
ScarboroughSeadog



Member Since: 21 Jul 2022
Location: Scarborough
Posts: 110
United Kingdom 2013 Defender 110 Puma 2.2 DCPU Keswick Green
Why didn't I think of that?!!!
Should work- I don't think it will foul on anything if rotated 180.
Thanks!
Post #971998 22nd Nov 2022 11:49am
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324
United Kingdom 
Alternatively, drill out the hole in the A pillar and install a rivnut of an appropriate size to suit the hole in the switch (M4, maybe?). Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #972004 22nd Nov 2022 12:11pm
View user's profile Send private message View poster's gallery Reply with quote
ScarboroughSeadog



Member Since: 21 Jul 2022
Location: Scarborough
Posts: 110
United Kingdom 2013 Defender 110 Puma 2.2 DCPU Keswick Green
Riv nut probably the belt and braces approach- good idea. Would provide a better fixing and improved earth via a machine screw.
Post #972006 22nd Nov 2022 12:15pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums