↓ Advertise on Defender2 ↓

Home > Technical > LED Headlight Upgrade not working
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Coops



Member Since: 20 Jan 2022
Location: Cambridgeshire
Posts: 16
United Kingdom 
LED Headlight Upgrade not working
I've upgraded the headlights on my 2009 Puma to WIPAC LED with Halo. The RH side is working fine but the LH headlight and main beam isn't working. The Halo is fine because that feeds from the side light.

From reading other posts I thought there was a switch problem so replace the main light swith and the main beam /indicator stalk too with Lucas units. Still not working. I've put a multimeter on the supply (blue/pink and blue/grey with black wires and there is nothing. Tested at the grey loom connector at the bulkhead....nothing. There is the relay delete thing in place (big pink one) above fuses.

Any ideas?
Post #939119 24th Jan 2022 12:45am
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410
United Kingdom 
Check fuse 23 and 25 in the main dash fuse box. On a Defender the headlights are fused separately. Both should be 10amp fuses.


Edit: https://www.lrworkshop.com/electrics/defen...nd-headers
Post #939166 24th Jan 2022 10:47am
View user's profile Send private message View poster's gallery Reply with quote
Coops



Member Since: 20 Jan 2022
Location: Cambridgeshire
Posts: 16
United Kingdom 
Thanks geobloke...I did check the fuses and they are good....sorry should have added that
Post #939195 24th Jan 2022 12:21pm
View user's profile Send private message View poster's gallery Reply with quote
geobloke



Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410
United Kingdom 
Do you have power at those fuses?
Post #939196 24th Jan 2022 12:22pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5700
2006 Defender 110 Td5 USW Zermatt Silver
To be clear. You say “There is the relay delete thing in place (big pink one) above fuses.” Is it a relay delete, or is it the dim dip bypass. I didn’t think the bypass was pink. Pink was the working relay.
Post #939205 24th Jan 2022 1:03pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20359
United Kingdom 
It is likely the dim dip that needs disabling, this was a headache that I had. $W33T $0U7H3RN $UG4R
🇬🇧🏴󠁧󠁢󠁥󠁮󠁧󠁿🏴󠁧󠁢󠁷󠁬󠁳󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🇮🇪🇺🇸⛽️🛢️⚙️🧰💪
Post #939273 24th Jan 2022 7:48pm
View user's profile Send private message View poster's gallery Reply with quote
Coops



Member Since: 20 Jan 2022
Location: Cambridgeshire
Posts: 16
United Kingdom 
Thanks Geobloke. I did some more testing then realised I was testing the wrong slots in the fuse box. I basically been looking at the fuse box upside down! When I pulled the right fuses at least one was blown put new ones in and everything now working! I both happy and really annoyed with myself for making such a school boy error…and I spent £70 I did need to on new switches.

Landy Andy…yes I meant the bypass it’s the YWZ 10003.

Thanks everyone for making me recheck the more obvious stuff.
Post #939306 24th Jan 2022 9:39pm
View user's profile Send private message View poster's gallery Reply with quote
L110CDL



Member Since: 31 Oct 2015
Location: Devon
Posts: 10751
England 
Good that you got it all fixed and working now and you have some good spares now Thumbs Up 1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.
Post #939308 24th Jan 2022 9:46pm
View user's profile Send private message View poster's gallery Reply with quote
mikeyo5ft



Member Since: 19 Sep 2022
Location: Wales
Posts: 3
United Kingdom 2010 Defender 90 Puma 2.4 HT Cairns Blue
Hello,

Did you pass the MOT with the halo wired into the side lights? I’ve got a set and just trying to fact find before fitting!

Thanks
Post #965430 19th Sep 2022 8:37am
View user's profile Send private message View poster's gallery Reply with quote
Screbble



Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2102
United Kingdom 2004 Defender 90 Td5 XS CSW Zambezi Silver
I’ve had the halos wired into the sidelights/markers for quite few years now, and whilst I did initially think it might not get past the MOT Tester, it hasn’t been an issue.

That said, I’ve now probably jinxed it…
Post #965434 19th Sep 2022 9:51am
View user's profile Send private message View poster's gallery Reply with quote
mikeyo5ft



Member Since: 19 Sep 2022
Location: Wales
Posts: 3
United Kingdom 2010 Defender 90 Puma 2.4 HT Cairns Blue
Ah ok, thanks for letting me know. I wasn’t sure whether to wire halos into side lights or spend a bit more time and wire into the ign!
Post #965452 19th Sep 2022 4:12pm
View user's profile Send private message View poster's gallery Reply with quote
Screbble



Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2102
United Kingdom 2004 Defender 90 Td5 XS CSW Zambezi Silver
Although it probably shouldn’t be the case, we all have very different experiences of MOT Inspectors and MOT tests.

I appear to have a decent MOT Inspector who understands and likes Land Rovers.

I’m not suggesting for one moment that he would apply too much discretion with regard to an issue affecting safety, but he does appear to apply common sense.

Having said all that, he’s never really commented on the LED headlamps with the halo connected to the sidelights/markers, and they’ve been fitted for a few years.

He does often tell me my truck is too clean! Rolling with laughter
Post #965454 19th Sep 2022 4:37pm
View user's profile Send private message View poster's gallery Reply with quote
mikeyo5ft



Member Since: 19 Sep 2022
Location: Wales
Posts: 3
United Kingdom 2010 Defender 90 Puma 2.4 HT Cairns Blue
Thank you, I think I will connect mine in the same manner, I was concerned that the Wipac halos might be a bit too bright at night but if others are getting on ok with them will follow suit 👍
Post #965460 19th Sep 2022 5:36pm
View user's profile Send private message View poster's gallery Reply with quote
DICKO1995



Member Since: 02 Feb 2024
Location: High Peak
Posts: 10
United Kingdom 2007 Defender 90 Puma 2.4 HT Tamar Blue
Wipac Led Connections

Click image to enlarge
Hi,

First post on here. Go easy.

I’m having a nightmare with fitting Wipac led headlights, should be plug and play but not that simple (for me anyway)

So my problem is that I have power to the headlights but only seem to have a low beam. With one push forward on the stalk the low beam comes on, when pressing the stalk forward again nothing changes, as if the main driving beam is not working. The full beam/flash is working and so are the DRL’s which are wired to the led sidelights.

I’ll attach a photo of the Wipac fitting instructions.

The main beam does work when the brown wire (main beam) and the green wire (dipped) are touching each other with the earth plugged into the connector. So i know that the main beam does actually work but once the wires are put into the connector and connected to the car I only have a small beam of light for both clicks of the stalk.

Any help on this would be great. Could be me being stupid Laughing


Cheers
Post #1023294 2nd Feb 2024 9:53am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums