 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10383  
|
I think there was little damage, big controversy on s&s fb page about the recovery though.
 . |
||
4th May 2022 9:20pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5850 
|
mmm yea...
 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
|
5th May 2022 7:14am |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Took the lady for a drive to the polling station, back via a local green lane enjoying the new brakes all the way
 |
||
|
5th May 2022 2:55pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5850
|
Is that short green lane still present that short cuts the Corwen lights? (Entrance I have used is on the road from Ruthin) 1999 Defender TD5 110
Regards John M0VAZ Econet Station 48 no clock |
||
|
5th May 2022 3:13pm |
|
| geobloke Member Since: 06 Nov 2012 Location: Nottinghamshire Posts: 4410
|
Hi John, yes it is. Still there and technically known as my suspension test run
 |
||
|
5th May 2022 4:47pm |
|
| MussEd Member Since: 20 Feb 2013 Location: East Lothian Posts: 354  
|
Fitted a Shift-R this morning. Which went pretty much to according to plan until I noticed the bolts needed to fasten the make unit I’m place weren’t in the box. Quick call to TMD and they’re posting them out. Don’t really need the car over the weekend so it’s all good.
Also made a start on fashioning a mounting bracket for an LED Strip for the rear of the car. Bit of a faff but got there, ran out of time before I could get the wiring done. I’ve told myself I’ll get up early in the morning to finish it off but the red wine is flowing so that’s maybe ambitious! |
||
|
6th May 2022 10:22pm |
|
| LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3643 
|
not today but over the last 2 weekends I have used dynamat supreme and some dodo mat insulation in an attempt to make it more pleasant on the motorway, done the front doors, rear door and front foot well, accessible bulk head and seat box.
Doors are now more conventional car like, and the cabin is definitely less tinny. Will move onto the rear end and roof over the next few weeks, happy so far. The dynamat is a pleasure to work with as is the dodomat, but both are a pig if you miss align them when sticking them down. You wont be getting them off easily again, for this reason I have deliberately avoided screwed panel joints and gone for the 80% of the option rather than cover the entire interior DEFENDER 90 TDCI XS, I hope everyone is well and your land rovers make you happy |
||
|
9th May 2022 5:32am |
|
| LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3643
|
not today but over the last 2 weekends I have used dynamat supreme and some dodo mat insulation in an attempt to make it more pleasant on the motorway, done the front doors, rear door and front foot well, accessible bulk head and seat box.
Doors are now more conventional car like, and the cabin is definitely less tinny. Will move onto the rear end and roof over the next few weeks, happy so far. The dynamat is a pleasure to work with as is the dodomat, but both are a pig if you miss align them when sticking them down. You wont be getting them off easily again, for this reason I have deliberately avoided screwed panel joints and gone for the 80% of the option rather than cover the entire interior DEFENDER 90 TDCI XS, I hope everyone is well and your land rovers make you happy |
||
|
9th May 2022 5:32am |
|
| seriesonenut Member Since: 19 Nov 2014 Location: Essex Posts: 1211
|
Swapped wheels for the summer, had my own rally and finally gave the 110 a wash and polish
 cw1 by Richard Holmes, on Flickr
Click image to enlargecw2 by Richard Holmes, on Flickr Click image to enlargecw3 by Richard Holmes, on Flickr 2010 XS USW 1957 Series One 88 diesel 1958 Series One 88 4x2 |
||
|
9th May 2022 7:38am |
|
| Pacha Member Since: 23 Feb 2020 Location: North Yorkshire Posts: 772 
|
Fitted LOF clutch pedal spring - what a
 job  Rgds.
Chris |
||
|
10th May 2022 5:04pm |
|
| judders Member Since: 28 Jul 2021 Location: Basingstoke Posts: 23  
|
Fitted a new set of side steps. Same style, just wanted them to look nice and shiny.
Click image to enlarge |
||
|
12th May 2022 6:08pm |
|
| kenzle8a Member Since: 12 Feb 2020 Location: None Posts: 1074 
|
All of my drains of revenue in one photo, went down to help lady haggis stick and ball her ponies
Click image to enlarge |
||
|
20th May 2022 7:38pm |
|
| spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4697 
|
Went to visit our daughter for the weekend. As you can see there are always a few jobs to do. Yep another couple of days on a mattress on the floor...
Click image to enlarge 1982 88" 2.25 diesel 1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
|
21st May 2022 10:55pm |
|
| Stacey007 Member Since: 25 Sep 2015 Location: Cheshire Posts: 3754
|
Hello
Managed to source a A frame and decided to fit.. Was going to upgrade the sump and bumper as I'm fed up of sanding and respraying the sump... (6 years old Urban one so not bad) Took bumper off and rust is showing on front..behind it, it's just a rust bucket... So was going to order new but wanted to see what it looked like. So I had a spare bumper (like you do...) sanded sump and quick spray job. Fitted it all this morning. Click image to enlarge Click image to enlarge Great |
||
|
22nd May 2022 8:16pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
