DEFENDER2.NET - View topic - Where can I buy a replacement clip?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Where can I buy a replacement clip?

Page 1 of 1

Print this entire topic ·

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

Where can I buy a replacement clip?

There is a plastic retainer clip at the end of the small diameter air box induction hose. It snapped whilst I was replacing the hoses and now requires tape to hold it in place. Friction alone wont cut it. Knowing how sensitive the air flow system is I am keen to replace it. Any clues?

link is a pic showing location (red circle).

Click image to enlarge

26th Mar 2022 8:44am

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

Better photo - how do you add larger images?

Click image to enlarge

26th Mar 2022 8:50am

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3683

I would think a jubilee clip will be plenty enough to hold it rather than tracking down a clip. I think it is the breather hose from the rocker cover, but it’s hard to tell from the pic!

26th Mar 2022 8:56am

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

Thx Co1.

The jubilee wont work as its a male connection to the rocker cover. You have to jubilee clip the hose onto a rigid plastic 'transfer' connector then push in the grommet seal end of it into the hole at the rocker cover. The clip assembly comes as one piece with an 'over' collar retaining it in position. Its the over collar that has snapped.

https://www.defender2.net/gallery/albums/u...ition3.jpg

26th Mar 2022 9:02am

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

Have you tried using the parts diagrams on the LRWorkshop site to find your clip?

https://www.lrworkshop.com/

Go to Menu/Diagrams/defender/

Then just start searching till you find it. If you create a free account you can enter your cars details so you’re only shown the relevant parts.

26th Mar 2022 10:19am

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3683

me your engine bay is clean!!

26th Mar 2022 2:32pm

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

Great idea Gasket....but its not there

it should be a part where 12 is...

Click image to enlarge

26th Mar 2022 4:10pm

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

Col1 - not my engine bay unfortunately

I dont trust anyone with an engine bay that clean...

26th Mar 2022 4:12pm

Doodlefish

Member Since: 18 Nov 2021
Location: United Kingdom
Posts: 54

My engine bay

So you wont see the offending tape alternative Ive used beneath the rocker cover but you can just see the jubilee clip that fixes it to the part I need. The plastic element is seated ok into whatever hole its supposed to go to but there should be a flexible retaining collar I assume is to prevent it shooting off.

Click image to enlarge

26th Mar 2022 4:27pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3683

Is it part of the rocker cover assembly instead?

26th Mar 2022 6:23pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum