DEFENDER2.NET - View topic - Replacement Hannibal gutter clamps

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Expedition & Overland > Replacement Hannibal gutter clamps

Page 2 of 3

Print this entire topic ·

doublea

Member Since: 12 Jul 2011
Location: Aberdeenshire
Posts: 495

2016 Defender 110 Puma 2.2 Adventure Phoenix Orange

Rack bought.

It came with 8 clamps

Click image to enlarge

and two lengths of moulding to run in the gutter beneath the rails.

Click image to enlarge

Lower part of the step missing though... Current Steeds:
2015 110 UW in Grasmere Green
2003 BMW F650 the Hack
2000 Elise
1992 Ducati 888 (no longer in bits, yahoo)
1990 TDR 250 (in bits again)
1988 TDR 250 (no longer in bits) and for sale

9th Mar 2021 12:25am

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7906

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

Nice one!

Not seen that rubber strip before, very useful. I just used a neoprene strip on mine. James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

9th Mar 2021 6:45am

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

2010 Defender 110 Puma 2.4 XS CSW Indus Silver

Just came across this thread as I am also looking for replacement clamps. Opportunity to buy a Hannibal Rack for my 110 but it is missing the clamps. Rubber present told it is new and never used but stored outside for few years so needs a clean up.

Other question I have is what is best to use as I would like to paint it Black, as aluminium can it be powder coated or I remember seeing at LR Show this year some black paint that leaves a slight texture, raptor or similar name I think. Any suggestions greatly received. Thanks

26th Nov 2021 3:03pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

I had my 110 rack blasted and powdercoated. Cost me about £300.

I have had a few of these racks come and go through my hands and do now have some clamps spare. I also recall seeing some feet and clamps on FB or something recently. I'll have a look and post the link if I find it.

Click image to enlarge

After powdercoating.

26th Nov 2021 5:09pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

Here you go:

https://www.facebook.com/marketplace/item/1067335714066875/

26th Nov 2021 5:14pm

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Thanks for this, I have it booked it in to be done as soon as I source the clamps.

I only need the threaded clamp piece as all the feet are present, believe 8 are required?

30th Nov 2021 1:27pm

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

They are a very simple design. Not too much of a stretch to make them yourself or have fabricator knock them up for you.

30th Nov 2021 1:31pm

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Someone has kindly put the dimensions up in a previous post so think may have to go this route - I'll speak to the company who is going to powder coat to see if they are able to fabricate these for me.\

thanks for you advise and help !

30th Nov 2021 1:34pm

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Just by way of update found the clamps so all good only missing the nuts - am I right in thinking these are self locking M8 nuts?

Need to get them ordered to pickup the rack and take it to be Powder coated so keen to get some ordered ASAP.

thanks

6th Dec 2021 10:36am

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2642

2010 Defender 90 Puma 2.4 HT Stornoway Grey

yes, m8.

when I got my Hannibal maybe 5 years ago now, it came without the clamps... seem to be a recurrent thing, missing clamps.

6th Dec 2021 12:09pm

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Glad I found them so everything can be power coated together.

M8 nuts ordered, thanks for help !

6th Dec 2021 2:04pm

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Dropped all off today for Power Coating

Can anyone advise where to source some rubber pads so I can reapply afterwards. Not sure needs replacing on the cross members as nothing actually goes on these as below the main rails but for the clamps certainly and to go along ladder when against car body?

These maybe https://www.amazon.co.uk/perfect-ideaz-col...amp;sr=8-5

9th Dec 2021 7:11am

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

The foam on the cross pieces will stop it rattling if there is no load on there. I used some 40mm self adhesive neoprene for that and the feet.

https://www.ebay.co.uk/itm/Neoprene-Self-A...635-2958-0

9th Dec 2021 7:36am

MattyEssex

Member Since: 23 Jul 2021
Location: Essex
Posts: 77

Ah makes sense he mentioned process may melt the pieces between the two rails so not sure how I'd replace between, perhaps can slip it underneath.

Cannot find 4mm so thinking 6mm will be ok https://www.amazon.co.uk/gp/product/B07VFS...&psc=1

9th Dec 2021 10:20am

bodstruck

Member Since: 09 May 2020
Location: Wiltshire
Posts: 922

I took mine apart completely before taking it to be blasted and powdercoated. The cross rails unbolt. In the right in this pic.

Click image to enlarge

9th Dec 2021 10:46am

Page 2 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum