Home > Faults & Fixes (L663) > Water noise |
|
|
c4skp Member Since: 11 Oct 2020 Location: Dorset Posts: 24 |
I had to remove a rubber grommet from the underside to drain it
|
||
27th May 2021 10:02pm |
|
Simon Audi Member Since: 19 Nov 2020 Location: Newport Posts: 544 |
You need to find out where its getting in - because I am sure long term that wont be good...
back to the dealer.. |
||
28th May 2021 5:07am |
|
Digger2000 Member Since: 19 Sep 2020 Location: Newcastle Posts: 590 |
There’s a known SSM for water ingress mine is getting something done next time it goes in but they didn’t say where it was.
|
||
28th May 2021 10:53am |
|
boxoftricks Member Since: 06 Feb 2019 Location: Home Counties Posts: 747 |
Water ingress is in the DNA of all Defenders.....
|
||
28th May 2021 2:44pm |
|
Digger2000 Member Since: 19 Sep 2020 Location: Newcastle Posts: 590 |
Mines going in on the 16th for various faults/fixes will update on the water ingress then.
|
||
28th May 2021 3:44pm |
|
c4skp Member Since: 11 Oct 2020 Location: Dorset Posts: 24 |
Will book it in and also see if they can sort out the SIM card not always working for online services 🤞
|
||
28th May 2021 8:35pm |
|
Archon Member Since: 26 Feb 2024 Location: Wales Posts: 2 |
Resurrecting an old post... was this ever sorted? After hearing sloshing i took the grommet out and gallons poured out
It's going in tomorrow by chance anyway and still by a whisker in warranty Any help gratefully received First post so please be gentle thanks |
||
26th Feb 2024 10:13am |
|
spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4658 |
Might be beneficial to leave the drain grommet out until the issue is sorted. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
26th Feb 2024 4:19pm |
|
Archon Member Since: 26 Feb 2024 Location: Wales Posts: 2 |
Yes, thanks, done that. Problem is grommet isnt at lowest point so there’s still a reservoir behind
|
||
26th Feb 2024 4:26pm |
|
spudfan Member Since: 10 Sep 2007 Location: Co Donegal Posts: 4658 |
Probably seems like heresy saying this, but would it be feasible to drill a hole at the lowest point to stop water building up? Just make the diameter the same as the existing whole and you can plug it with a grommet when the issue is solved. If you do drill a new hole do not for get to put some paint on the new edges to stop it rusting. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali 2008 110 2.4 tdci csw-Zulu 2011 110 2.4 tdci csw-Masai |
||
26th Feb 2024 4:35pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis