DEFENDER2.NET - View topic - Help choosing rivet length

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Help choosing rivet length

Page 1 of 1

Print this entire topic ·

Rye54

Member Since: 09 Jul 2017
Location: Scotland
Posts: 48

Help choosing rivet length

Looking for a bit of help on what length rivets to buy to join 2 pieces of 2mm aluminium sheet together, there seems to be discrepancies between what various suppliers and guides recommend. I had originally planned to buy them based on the grip range of the rivet 4.8x10mm rivet with a grip range of 4-6mm, which according to one supplier was correct. However, having just checked online some websites recommend combined material thickness (4mm) + (1.5 x rivet diameter = 1.5x4.8 = 7.2mm) = 11.2mm meaning I would need a 4.8x16mm rivet with a grip range of 10-12mm.

Also, looking at aluminium case with stainless steel mandrel rivets, I assume they are widely used on aluminium body panels?

Any help would be greatly appreciated.

3rd May 2021 2:54pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1782

2008 Defender 110 Puma 2.4 CSW Alpine White

I was taught panel thickness plus 1.5 rivet diameter was correct for a normal 'pop' rivet.

Panel thickness plus 1x rivet diameter for a sealed 'Avdel' type

Normally disregard any allowance for sealer etc.

HTH Keith

3rd May 2021 6:41pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum