 | Home > Maintenance & Modifications > Uproar 4x4 front end. |
 
|
|
|
| DonH2000 Member Since: 12 Jan 2015 Location: North Kent Posts: 551   
|
It arrived at 8.45 am and fitted by 10.30am!
Very please with the item. 
Cheers Don. |
||
24th Feb 2021 11:01am |
|
| williamthedog Member Since: 29 Dec 2012 Location: south wales Posts: 3441 
|
Very nice indeed. Uproar do make rather nice kit.
 |
||
|
24th Feb 2021 12:05pm |
|
| camelman Member Since: 27 Feb 2013 Location: Peak District Posts: 3372
|
Are we looking at the bumper?
|
||
|
24th Feb 2021 12:16pm |
|
| williamthedog Member Since: 29 Dec 2012 Location: south wales Posts: 3441
|
^yes, it'll be made out of stainless steel too,if made by uproar.
|
||
|
24th Feb 2021 12:34pm |
|
| DonH2000 Member Since: 12 Jan 2015 Location: North Kent Posts: 551
|
Yes Camelman we are. Will refit the grill panel this afternoon. I was impressed with the build quality and it was quite easy to fit. The passenger side needed a bit of loosening off and following the advice of Ed China "loosely assemble and once fitted tighten up"!! Mrs H is yet to notice.............. Cheers Don. |
||
|
24th Feb 2021 1:45pm |
|
| camelman Member Since: 27 Feb 2013 Location: Peak District Posts: 3372
|
I've got years worth of stuff Mrs Camelman hasn't notice yet  |
||
|
24th Feb 2021 1:54pm |
|
| DonH2000 Member Since: 12 Jan 2015 Location: North Kent Posts: 551
|
"I've got years worth of stuff Mrs Camelman hasn't notice yet"....
I also have a room with 10 guitars...... Mrs H is not allowed in there!!! Cheers Don. |
||
|
24th Feb 2021 3:51pm |
|
| V8Simon Member Since: 17 May 2016 Location: Prestatyn, Wales Posts: 147 
|
Me thinks we could have a whole thread on what is on our LR's that others aren't aware of or indeed noticed and a sub thread where parts are noticed but we think there might have been a misunderstanding around costs of said parts.........
 1984 90 V8 puma want to be. |
||
|
24th Feb 2021 4:05pm |
|
| Intercept Member Since: 27 Feb 2017 Location: Suffolk Posts: 587 
|
I replaced a 2 years old yet rusty one on mine with one of their OE look stainless bumpers last week. Very nice quality indeed, but their captive nut plates needed some adjustment with the grinder to make them fit into the original spring clip
Before: Click image to enlarge |
||
|
24th Feb 2021 5:32pm |
|
| BaronDefenders Member Since: 28 Jun 2019 Location: London/Cotswolds Posts: 896 
|
You shouldn’t need to use the old spring clip with the captive plate. Scott might have changed the design since you bought your bumper though, Intercept. Charlie
1949 Series 1 80 (SOLD) 2002 Td5 90 (SOLD) 2008 Freelander 2 (SOLD) 1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored) 1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE) 2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK) 2012 Puma 110 Zermatt Silver (Overlanding Build) Instagram: @BaronDefenders |
||
|
24th Feb 2021 5:37pm |
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 
|
I swapped out all the parts on one of mine other than the number plate and got away with it for a while... Click image to enlarge |
||
|
25th Feb 2021 10:02am |
|
| MussEd Member Since: 20 Feb 2013 Location: East Lothian Posts: 354  
|
Though things are trickier now my OH is working from home all the time, I just about managed to swap out my front without detection until my Landy obsessed 9 y/o gave the game away.
"I would have got away with it if it hadn't been for you pesky kids!" |
||
|
25th Feb 2021 11:21am |
|
| DonH2000 Member Since: 12 Jan 2015 Location: North Kent Posts: 551
|
"Intercept" I replaced a 2 years old yet rusty one on mine with one of their OE look stainless bumpers last week. Very nice quality indeed, but their captive nut plates needed some adjustment with the grinder to make them fit into the original spring clip
"
The bumper came with pre-cut plates to replace the spring clips (I tried the existing ones but the new bottom bracket was too thick for them to fit). These plates had a little "finger" sticking out to aid with lining them up blind when dropping the bolts down, I wish I had taken a picture of them! In the end it was much easier than I expected as 'Land Rover build tolerances' could have made it a nightmare. Cheers Don. |
||
|
25th Feb 2021 3:25pm |
|
| V8Simon Member Since: 17 May 2016 Location: Prestatyn, Wales Posts: 147
|
Supacat still winning I think   1984 90 V8 puma want to be. |
||
|
25th Feb 2021 4:39pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
