DEFENDER2.NET - View topic - Gear selector no bias position

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Gear selector no bias position

Page 2 of 2

Print this entire topic ·

simond

Member Since: 15 Feb 2008
Location: Kent
Posts: 26

Just to add that PeterA’s experience was presumbly based on the gearlever being assembled so the ball was riding above the plastic cage in the gearbox. At some point it will have worn/forced its way through the curved upper rim moulding of the plastic cage allowing the gearlever to drop down 15mm.

He might need a new cage, looks like a 10p part so probably a fiver.

During my search for a solution I found out that I have the same gearbox in our Mustang Bullitt. Must be good for a few more hp than the Defender chucks out. Simon D

10th Feb 2021 10:41am

Rory2013puma

Member Since: 08 Jan 2021
Location: Uk
Posts: 3

I just went back to this the other day and found the same as yourself. I had a few attempts at it before I pretty much did the same thing you did. I removed the gear selector and installed the lower plastic cup onto it first before dropping it down in place. All good now.

12th Feb 2021 6:21am

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum