DEFENDER2.NET - View topic - Moving to a 130

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > 130 > Moving to a 130

Page 3 of 3

Print this entire topic ·

Dowks

Member Since: 29 Nov 2012
Location: Surrey
Posts: 121

2015 Defender 130 Puma 2.2 HCPU Keswick Green

Hood on, very pleased with it fit wise. Also added a Mota Lita wheel to give me a bit more cabin space. Both rear door shedders full of holes so in order to stop the carpets getting wet

Trip out with the kids down a nice Sandy Lane today

Click image to enlarge

2nd Jan 2021 3:29pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17417

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

For info when you sort out the rear door water shedders you may want to add an additional home-made shedder.

I found my rear floor was always getting wet when it rained, from water entering the door between the glass and the door skin (even with good seals there is a significant ingress. After puzzling about the door drainage for a while, I realised that the factory shedder actually directs water inside the vehicle! I added some conventional shedders cut from builders' plastic sheet (the sort used for a DPM in concrete floors) and taped it inside the door to direct water to the drain holes right at the bottom. Since doing this I have had no water at all in the back.

2nd Jan 2021 3:52pm

Dowks

Member Since: 29 Nov 2012
Location: Surrey
Posts: 121

Thanks for the tip. My shedders had loads of holes in where the previous owner had added checker plate bottoms to the door and mounted them with self tappers through the shedder...... plus the grommet for the window electrics

Will go get some plastic sheet, and more mastic!

2nd Jan 2021 5:46pm

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7906

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

That looks amazing, really like it! Nice looking lane too! James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

3rd Jan 2021 8:26am

tookaphotoof

Member Since: 18 Mar 2013
Location: dordrecht
Posts: 1279

2013 Defender 130 Puma 2.2 HCPU Santorini Black

blackwolf wrote:
For info when you sort out the rear door water shedders you may want to add an additional home-made shedder.

I found my rear floor was always getting wet when it rained, from water entering the door between the glass and the door skin (even with good seals there is a significant ingress. After puzzling about the door drainage for a while, I realised that the factory shedder actually directs water inside the vehicle! I added some conventional shedders cut from builders' plastic sheet (the sort used for a DPM in concrete floors) and taped it inside the door to direct water to the drain holes right at the bottom. Since doing this I have had no water at all in the back.

Never af any leakage on the rear floor. The front however...

3rd Jan 2021 8:54am

Page 3 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum