 | Home > General & Technical (L663) > Suppliers to the new Defender |
 
|
|
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018   
|
I didn't get to see the original article, but usually the free websites pick up these stories and repeat them a little while later. I'm wondering if this is the case here, and unlike others with hardware/software issues, JLR's issue was more down to regulatory compliance: "Land Rover Halts Evoque And Disco Sport P300e PHEV Sales After claiming that the Evoque P300e and Discovery Sport P300e plug-in hybrid models put out as little as 32 and 36 g/km of CO2, respectively, Land Rover has had to halt sales in order to reclassify their emissions ratings. “Due to the impact of the COVID-19 pandemic, we are not yet in a position to deliver the previously communicated best-case WLTP combined figures,” said Land Rover in a statement. “Work is ongoing, as the business emerges from the COVID-19 pandemic, to deliver the extended electric range and lower CO2 figures.” The British brand now says that the lowest emitting model puts out 44 g/km and has an electric range of 43 km (27 miles), compared to 66 km previously – although they declined to say which model this is. Meanwhile, orders are scheduled to restart on October 26, which is good considering how the Evoque and Discovery Sport are JLR’s two best-selling models in Europe and therefore key to the company’s push to get its fleet CO2 levels below the 132 g/km limit. According to Autonews Europe, LR buyers writing on an Evoque owners forum in the UK have already complained that deliveries have been delayed. One customer in particular wrote that his Discovery Sport P300e was built in September yet was still being held at the factory. Meanwhile, a UK Land Rover retailer said that it now has to wait until November for its demonstrator model, although some dealerships will start receiving their PHEVs “later this week.”" https://www.carscoops.com/2020/10/land-rov...hev-sales/ |
||
20th Oct 2020 6:17am |
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018
|
And to show you how far Autocar are away from real journalism, today they published this drivel...
https://www.autocar.co.uk/car-review/land-...namic-2020 |
||
|
21st Oct 2020 6:09am |
|
| diduan Member Since: 13 Oct 2016 Location: Central Balkan Posts: 260 
|
I didn't know Dana supplies the axles of the new defender. Sorry if this has been covered.
https://www.dana.com/newsroom/press-releas...-defender/ Defender 110 SW MY2011 2.4tdci decat, no EGR Jeep Wrangler YJ 1990 4.0. Front 78' Dana 60, Rear CUCV 14 bolt |
||
|
28th Feb 2021 8:34am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
