 | Home > Technical > Choosing hose clamps |
 
|
|
|
| Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3287   
|
JCS hi-grip stainless. WARNING.
This post may contain sarcasm. |
||
16th Sep 2020 5:11pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10381
|
Agreed. The BAS clamps are lame. I had some more heavy duty versions ‘in stock’. Though
I don’t know the brand, they’re stainless though. |
||
|
16th Sep 2020 5:12pm |
|
| Ianh Member Since: 17 Sep 2018 Location: Essex Posts: 1999
|
Check out HCL super torque hose clamps https://hcl-clamping.co.uk/collections/hea.../brand_hcl
|
||
|
16th Sep 2020 7:01pm |
|
| discomog Member Since: 09 May 2015 Location: Notts/Lincs Border Posts: 2526 
|
Another vote for Mikalors Supra in stainless. Easy to fit without distorting due to flip over fastening. Defender 90XS SW
Mini Countryman Cooper S Morgan Plus 8 |
||
|
16th Sep 2020 7:24pm |
|
| Bluest Member Since: 23 Apr 2016 Location: Lancashire Posts: 4209 
|
Thanks all. The Hi Torque style worm drive clamps I don’t think are suitable for silicone hoses due to pierced holes in the band. I’ve read a few things that suggest this can cut the hose. Standard Jubilee Clio’s aren’t fully pierced but can’t be tightened so much.
With the Mikalors, how do I spec the size given they have very range of working diameters? 2007 110 TDCi Station Wagon XS |
||
|
16th Sep 2020 7:34pm |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2151 
|
Find Mikkalors and their copies are terrible as they concentrate the 'clamp' on the bolted side........
|
||
|
16th Sep 2020 7:35pm |
|
| Bluest Member Since: 23 Apr 2016 Location: Lancashire Posts: 4209
|
Might just try the regular legit Jubilee stainless steel ones to begin with. 2007 110 TDCi Station Wagon XS
|
||
|
16th Sep 2020 7:41pm |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2151
|
To be honest unless you are building a race car then good quality pukka Jubilee's take a lot of beating IMO
|
||
|
16th Sep 2020 7:42pm |
|
| Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3287
|
This may be of help. Westfield stock most of the ones mentioned above.
https://www.westfieldfasteners.co.uk/HoseClip.html WARNING. This post may contain sarcasm. |
||
|
16th Sep 2020 7:50pm |
|
| trailbear Member Since: 14 Sep 2016 Location: Scotland Posts: 405
|
I used Westfield fasteners jubilee clips for the silicone hoses on my previous rebuild, they are very good quality and the price was pretty good as well
|
||
|
16th Sep 2020 7:57pm |
|
| R1200GS Member Since: 12 Jul 2015 Location: Hampshire Posts: 265 
|
so what would be the correct clamp size for the BAS silicon hoses?
Forgive my ignorance but I am thinking of replacing my standard hoses as well Regards Dave |
||
|
16th Sep 2020 9:45pm |
|
| V8GPC Member Since: 18 Jul 2016 Location: Manchester Posts: 289
|
https://www.floteconline.com/sections/powergrip-clamps
Anyone used heat shrink hose clamps? Click on the image and it takes you to another page with a handy video https://www.floteconline.com/categories/powergrip-sb |
||
|
17th Sep 2020 5:48am |
|
| Bluest Member Since: 23 Apr 2016 Location: Lancashire Posts: 4209
|
Went standard Jubilee stst. Here's a comparison with the supplied hose clamp. Jubilee at the back. Should be much stronger.
 Click image to enlarge 2007 110 TDCi Station Wagon XS |
||
|
18th Sep 2020 4:46pm |
|
| Supacat Member Since: 16 Oct 2012 Location: West Yorkshire Posts: 11018 
|
Very interesting ~ not heard of these before. As an aside, it was interesting to watch the video and see the issues they highlighted with silicone hoses.  |
||
|
18th Sep 2020 6:48pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
