DEFENDER2.NET - View topic - [Wanted] Bike 🚴‍♂️ rack wanted....

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > For Sale & Wanted > [Wanted] Bike 🚴‍♂️ rack wanted....

Page 2 of 2

Print this entire topic ·

Riksbar

Member Since: 29 Sep 2013
Location: North
Posts: 20

1997 Defender 110 300 Tdi CSW Alpine White

Got one but I’m quite a way away

I’ve got a used one of these

https://www.ebay.co.uk/itm/222005768143

You could have it for £50 collected but I don’t know what the postage would be and it would be a massive pain in the rear to package. I’m in Burnley, Lancashire.

23rd May 2020 2:07pm

milesr3

Member Since: 12 Feb 2013
Location: Suffolk
Posts: 873

2016 Defender 90 Puma 2.2 XS CSW Keswick Green

johnnyd wrote:

Have you fitted it yet? What’s it like?

Very substantial - the column support bracket which bolts on behind the towbar is 1/2" plate!

It is tight getting the column in/out of the support bracket because it rubs on the spare tyre when fitting/removing, but you can get it in/out with a bit of persuasion. I think it's great for £95 compared to some of the other rubbish I've seen; I picked up a Montblanc spare wheel mounted carrier in a local mtor factor that looked like it would fall off in ten minutes and I didn't want to add any more weight to the rear door.

Click image to enlarge

Click image to enlarge

Last edited by milesr3 on 26th May 2020 1:43pm. Edited 1 time in total

26th May 2020 1:00pm

johnnyd

Member Since: 13 Apr 2013
Location: Chippenham
Posts: 1006

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

When it says overhang is 187 mm what exactly does that mean, my spare wheel on the 90 sticks out from the back door by 280 mm but I am sure my spare wheel is the same size as most 90's?

JD 2008 TDCi 2.4 XS CSW

26th May 2020 1:29pm

johnnyd

Member Since: 13 Apr 2013
Location: Chippenham
Posts: 1006

Also will it fit on this tow bar ? It looks great, ideal for me...

JD

Click image to enlarge 2008 TDCi 2.4 XS CSW

26th May 2020 1:41pm

milesr3

Member Since: 12 Feb 2013
Location: Suffolk
Posts: 873

johnnyd wrote:
When it says overhang is 187 mm what exactly does that mean

Measure from the mounting surface on you drop plate to the outer edge of the spare tyre. Mine is 165mm with the NAS rear step, so the column clears the tyre by 22mm.

Click image to enlarge

johnnyd wrote:
Also will it fit on this tow bar ? It looks great, ideal for me...

Probably not then - if a standard tyre is 235mm wide.

26th May 2020 1:53pm

johnnyd

Member Since: 13 Apr 2013
Location: Chippenham
Posts: 1006

So what size is your spare wheel if that bar fits? Or does your tow bar arrangement stick out a lot from the crossmember?

JD 2008 TDCi 2.4 XS CSW

26th May 2020 2:18pm

milesr3

Member Since: 12 Feb 2013
Location: Suffolk
Posts: 873

The drop plate on the NAS step sticks out 5" from the crossmember. Sorry I didn't actually notice how far this protrudes from the rear crossmember - it would make an expensive bike carrier if you didn't already have one!

The rear tyre is a standard 235/80R16 and overhangs the rear door by 295mm.

26th May 2020 2:33pm

johnnyd

Member Since: 13 Apr 2013
Location: Chippenham
Posts: 1006

Ah OK, that explains it, I guess that's never going to fit mine then, my plate is about 1cm proud of the crossmember

JD 2008 TDCi 2.4 XS CSW

26th May 2020 2:40pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum