DEFENDER2.NET - View topic - Shroppy's V8 127 Rebuild

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > 130 > Shroppy's V8 127 Rebuild

Page 1 of 4

Print this entire topic ·

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

1986 Defender 130 V8 Petrol HCPU Aintree Green

Shroppy's V8 127 Rebuild

This weekend I collected the 110s replacement, with the 110... felt a bit mean really.
She's a 1986 127, still running a 3.5 V8 on carbs

Chassis is pretty good, bulkhead not awful, it'll be a great hack until it's converted back into a DCPU onto a Galv chassis most likely.

If anyone has any of the necessary bits lurking about, please drop me a message.

Click image to enlarge 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

Last edited by Shroppy on 22nd Jul 2020 6:50am. Edited 4 times in total

9th Dec 2019 11:14am

Mash

Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674

Watching with interest as the possibility of a single to double cab 130 might be on the cards

90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html
110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html
52HG25 lightweight https://www.defender2.net/forum/topic72342.html
D3 Hse - Fiona
Capri 2l S - Anna

Think I might have a problem............

9th Dec 2019 11:53am

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

Sounds a great project! Good luck

James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

9th Dec 2019 12:33pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Bit of an update...

Had a bit of a think and decided the RPi 4.6 V8 and R380 I was going to use in my 88" S1 would be much better suited to the 130.

Click image to enlarge

Click image to enlarge

Also took the Christmas break as an opportunity to collect some bits for the rebuild, thankful for the Seat daily.
A friend tipped me off to a set of four Exmoor Trim seats, one of the bases has a tear but hopefully the trim shop near me can fix that.

Click image to enlarge

Managed to find a double cab roof (albeit with a bit of a dent on the drivers side that will need pulling out with a ratchet strap once fitted), and a few other panels including some puma doors locally. Very happy chappy!

Click image to enlarge

Click image to enlarge

A trip to Anglesey to collect a Hicap rear tub and rear bulkhead, they were just round the corner from Red Wharf Bay!

Click image to enlarge

Richard's 130 chassis will be on order soon, still need to find a good TDCI bulkhead, wings and bonnet, TD5 seatbox, rear seatbox and late TD5 dash..
But the shopping list is getting smaller.

Unsure whether to go Wolf/TDCI rear axle or stick with a disc Salsibury?

Also not set on suspension yet.. 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

Last edited by Shroppy on 8th Jun 2020 7:55pm. Edited 1 time in total

6th Jan 2020 8:29pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Nice thread, watching with interest

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

6th Feb 2020 10:20pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Collected the new chassis and, the paint has arrived....

Just need to finish the axles and order the suspension

Click image to enlarge 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

Last edited by Shroppy on 14th Mar 2020 9:31pm. Edited 2 times in total

14th Mar 2020 9:21pm

Mash

Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674

All coming together nicely

14th Mar 2020 9:27pm

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

Great start! The good old grain store workshop! James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

15th Mar 2020 6:56am

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

What Mash said

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

18th Mar 2020 8:26pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Another piece of the puzzle, a (mostly) rust free 300tdi bulkhead complete with dash, pedal boxes etc.

Poor Seat....

Click image to enlarge 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

18th Mar 2020 8:34pm

Neilios

Member Since: 01 Nov 2017
Location: Co. Durham
Posts: 169

1997 Defender 110 300 Tdi HCPU Keswick Green

That’s what I like to see a Seat earning it’s keep helping a Defender live again. Looking forward to seeing the build come together. 1997 110 Hi-Cap Keswick Green
1997 90 Truck Cab Blue
1996 Discovery Pickup

28th Apr 2020 9:11pm

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Well Covid-19, Univeristy work and other challenges had stopped any progress until last week.

The chassis is now painted, no mean feat as it's chuffing huge. Process was as follows;

- Wash and de-grease.

- Provide mechanical key using red scotchbrite (this took me and the girlfriend 3 hours).

- Prime with 2 coats of Jotun Penguard HB (5 litres in total).

- Topcoat with 2 coats of Jotun Hardtop AX (3.6 litres in total).

Click image to enlarge

Click image to enlarge

I quite enjoy spraying but, won't rush to do a chassis again, lots of little corners and fiddly bits.

I have a ruck of leave left to take so hopefully will be able to get to the rolling chassis stage reasonably quickly. Just need to weigh up whether its worth having all the suspension linkages galvanised.... 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

Last edited by Shroppy on 8th Jun 2020 7:57pm. Edited 2 times in total

1st Jun 2020 7:06am

Mash

Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674

They are that thick unless you plan on parking in the sea I wouldn’t bother, fresh coat of paint and a layer of dinitrol will be fine

1st Jun 2020 7:25am

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Good point, I'm guilty of thinking "well, whilst I'm here".

I also collected a set of doors from Badger110 (great guy) and a seatbox the weekend before last so the list of bits needed is slowly reducing. Forgot to take photos of that though

1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

Last edited by Shroppy on 22nd Jul 2020 6:52am. Edited 2 times in total

1st Jun 2020 7:53am

Shroppy

Member Since: 25 Feb 2016
Location: Shropshire
Posts: 866

Moved the chassis back indoors in preparation for the axles to be fitted over the next few weeks;

Click image to enlarge

And, collected a few more pieces of the puzzle thanks to AndrewS, great to have a socially distanced chat and admire Longhshanks in the flesh.

Click image to enlarge

Click image to enlarge
Hopefully the axles and gearbox will start to take shape this week, trying to get things moving at a reasonable pace now that University is out of the way for the time being.

Does anyone have any thoughts on colour? I'm leaning towards Montalcino red for a bit of sophistication.... 1985 127 V8 Build Thread
Series 2 109"
Series 1 80"

7th Jun 2020 8:59pm

Page 1 of 4

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum