DEFENDER2.NET - View topic - Washer pump size or grommet

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Washer pump size or grommet

Page 1 of 1

Print this entire topic ·

drakes

Member Since: 09 Oct 2009
Location: Hexham
Posts: 112

2004 Defender 90 Td5 HT Auto Belize Green

Washer pump size or grommet

Has anyone got a screen wash pump at hand ( one that fits a TD5 not sure what else it may fit ) that they could measure for me. What I need to know is the OD of the bit that fits into the grommet in the washer reservoir or the ID of the grommet if you have one of those.

Thanks

Keith

18th Feb 2020 11:45am

Tegner

Member Since: 31 Jul 2018
Location: Alnwick Northumberland
Posts: 187

2010 Defender 90 Puma 2.4 HT Zermatt Silver

grommet

Hi Keith if its the same as a TDCI the part No. is RTC 3959 pity your not closer I have a spare
regards
Ken

18th Feb 2020 4:15pm

drakes

Member Since: 09 Oct 2009
Location: Hexham
Posts: 112

Tegner

Is it possible you could measure the ID of the grommet as I think it is the same one.

Keith

18th Feb 2020 4:21pm

Tegner

Member Since: 31 Jul 2018
Location: Alnwick Northumberland
Posts: 187

Grommet

Hi swapped my pump for the Optimill set up internal diameter 8mm where the pump sits
diameter for the washer tank 12mm

18th Feb 2020 4:27pm

drakes

Member Since: 09 Oct 2009
Location: Hexham
Posts: 112

Thanks that's what I needed to know

Keith

18th Feb 2020 4:31pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17458

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

TDCi and TD5 are the same.

18th Feb 2020 6:32pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6102

And a freelander washer pump fits straight in! slightly taller than the Td5 one, but (in my case) pumps a helluva lot better than the cr@ppy pump I had in place before.

19th Feb 2020 6:52am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17458

I use a Disco 2 headlamp washer pump for my screenwasher, and a Rover 25 headlamp washer pump, which is essentially the same, for the headlamp washers.

Both are much more powerful and shift much more fluid than the standard screen washer pump.

19th Feb 2020 1:21pm

Roy5695

Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123

2011 Defender 110 Puma 2.2 XS DCPU Indus Silver

I also use a discovery headlight washer pump. Coupled with a bigger internal diameter pipe (10mm) and a CSI washer jet nozzle. It’s incredible.

Although I did have to power the new washer pump with a relay as it draws about 17Amps 😬 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy

20th Feb 2020 9:01pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17458

Both my pumps have their own relay.

20th Feb 2020 10:20pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum